Part Description: 2006 Chevrolet Impala AC Tube Valve
More Info
Vehicle Fitment
2006 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Impala Seal, Evap
More Info
Vehicle Fitment
2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for A/C System Seal Kit Repair
Q: What should be done before servicing the O-Ring?
A:
Disassemble the A/C refrigerant components.
By Bob
GM Specialist
28/10/2022
Q: What should be done before servicing the Sealing Washer?
A:
Remove the seal washer from the A/C refrigerant component.
By Bob
GM Specialist
28/10/2022
Q: What should be noticed when servicing the Sealing Washer?
A:
Flat washer-type seals do not require lubrication.
By Bob
GM Specialist
28/10/2022
Q: What should be noticed when servicing the O-Ring?
A:
DO NOT allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Mass Air Flow/Intake Air Temperature Sensor?
A:
Remove the air intake duct, and disconnect the mass air flow/intake Air Temperature Sensor electrical connector. Remove the MAF/IAT sensor bolts, the MAF/IAT sensor, and the MAF/IAT sensor seal.