< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Pad, Rear Seat Cushion
PartNumber: 89041882
Product Specifications- Notes: Seat Cushion
- Other Names: Seat Cushion Pad
- Item Dimensions: 30.2 x 25.3 x 6.0 inches
- Item Weight: 10.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Pad, Rear Seat Cushion
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2006 Chevrolet Equinox Pad, Driver Seat Cushion
PartNumber: 89041752
Product Specifications- Notes: Driver Seat, W/O Sport
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 28.7 x 23.0 x 10.5 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Pad, Driver Seat Cushion
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
OEM (Genuine) 2006 Chevrolet Equinox Pad, Passenger Seat Cushion
PartNumber: 89041834
Product Specifications- Notes: Passenger Seat, W/O Sport
- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 32.0 x 23.2 x 9.5 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Pad, Passenger Seat Cushion
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Seat Cushion Pad Repair
Q: How to remove the seat cushion cover and pad?
A:
You can remove the front seat, remove the seat cushion pan bolts and remove the seat cushion assembly, disconnect the J-hook retainers, disengage the J-strip at the rear of the cushion, remove the seat cushion cover from the pad by carefully disengaging the hook and loop retainers and remove the seat cushion pad from the frame.
By Bob
GM Specialist
01/11/2022Q: How to remove the seat cushion heater element?
A:
You can remove the front seat from the vehicle, place the seat on a clean workbench, remove the seat cushion cover and pad and then pull on the heater element to remove the element from the seat foam.
By Bob
GM Specialist
01/11/2022Q: How to install the seat cushion?
A:
You can place the outer trim panel on the seat, secure the panel with the panel screws, and place the cover over the recliner handle. You can push firmly to lock the handle into place, place the cover over the seat riser handle, and then install the front seat.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat cushion outer trim panel?
A:
The procedure is to remove the front seat, the trim cover screws, the seat back recliner trim cover, the outer trim panel screws, and the trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the panel screws?
A:
The recommended torque is 2.5 N.m (22 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the seat cushion cover and pad?
A:
You can place the seat cushion pad to the frame, engage the hook and loop retainers by pressing down on the retainers, engage the J-strip at the rear of the cushion cover to the seat pan, connect the J-hook retainers, install the frame bolts and then install the front seat into the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the seat cushion outer trim panel?
A:
The procedure is to install the trim panel and secure it with the trim panel screws and then install the front seat.
By Bob
GM Specialist
01/11/2022Q: How to remove the seat cushion?
A:
You can remove the front seat, the riser handle trim by pulling firmly on the trim, the recliner handle trim by pulling firmly on the trim, the trim panel screws, and the trim panel from the seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the anchor bolts?
A:
The recommended torque is 50 N.m (37 l ft).
By Bob
GM Specialist
01/11/2022Q: How to install the seat cushion heater element?
A:
You can peel off the self-stick tape from the back of the heater element, and place the heater element over the seat foam pad. You can press firmly to engage the adhesive, route the heating element wiring harness under the seat pad and connect the harness to the heater module, install the seat cushion cover and pad, and then install the front seat to the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (7)