< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Adjust Switch
PartNumber: 12451495
Product Specifications- Notes: Driver Side W/Power Seat
- Location: Driver Side
- Item Dimensions: 4.2 x 1.9 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Adjust Switch
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$44.80 MSRP:$67.58You Save: $22.78 (34%)
OEM (Genuine) 2006 Chevrolet Equinox Adjust Knob
PartNumber: 10325879
Product Specifications- Notes: Driver Side W/Power Seat
- Location: Driver Side
- Item Dimensions: 2.5 x 1.4 x 0.5 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Adjust Knob
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$11.80 MSRP:$17.79You Save: $5.99 (34%)
OEM (Genuine) 2006 Chevrolet Equinox Module Asm, Passenger Seat Heater Control
PartNumber: 22685813
Product Specifications- Notes: Equinox, Torrent; Driver Side W/Power Seat
- Location: Driver Side
- Item Dimensions: 2.7 x 2.3 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Module Asm, Passenger Seat Heater Control
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
OEM (Genuine) 2006 Chevrolet Equinox Switch Asm, Driver Seat Heater
PartNumber: 89041800
Product Specifications- Notes: Driver Side W/Power Seat
- Location: Driver Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 2.9 x 2.7 x 1.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Switch Asm, Driver Seat Heater
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Power Seat Switch Repair
Q: How to install the lumbar actuator?
A:
You can install the lumbar actuator to the seat cushion frame with screws, the lumbar knob, the lumbar cable in the actuator, and the front seat.
By Bob
GM Specialist
01/11/2022Q: How to remove the lumbar actuator?
A:
You can remove the front seat, the lumbar cable from the actuator, the lumbar knob, the lumbar actuator screws, and the actuator from the seat.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the seat switch bezel?
A:
The procedure is to install the seat switch bezel, press it into place and then return the seat to the original position.
By Bob
GM Specialist
01/11/2022Q: How to install the seat switch?
A:
You can install the switch into the trim panel, connect the electrical connector, install the outer trim panel to the seat cushion and then install the seat switch bezel.
By Bob
GM Specialist
01/11/2022Q: How to remove the seat switch?
A:
You can remove the seat switch bezel. Remove the outer trim panel from the seat cushion, disconnect the electrical connector, remove the switch, and then use a small flat-bladed tool to remove the switch from the trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat switch bezel?
A:
The removal procedure is to move the seat to the most forward position and then using a flat-bladed tool, remove the bezel from the seat switch.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lumbar actuator to the seat cushion frame with screws?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (2)