< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Flasher
PartNumber: 15803671
Product Specifications- Notes: Equinox, Torrent
- Other Names: Flasher
- Item Dimensions: 2.1 x 1.6 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22719429
- Part Description: 2006 Chevrolet Equinox Flasher
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$68.08 MSRP:$107.09You Save: $39.01 (37%)
OEM (Genuine) 2006 Chevrolet Equinox AC Relay
PartNumber: 13500114
Product Specifications- Notes: Underhood, AC; Instrument Panel, Park & Headlamp
- Item Dimensions: 3.8 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12193606, 19115080, 15328866, 12135034, 15393412, 12088567, 12135170, 19116057
- Part Description: 2006 Chevrolet Equinox AC Relay
Vehicle Fitment- 2006 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$9.55 MSRP:$20.04You Save: $10.49 (53%)
FAQ for Flasher Units Repair
Q: What is the recommended torque for the switch screws?
A:
The recommended torque is 2.5 N.m (22 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the hazard and turn signal flasher?
A:
You can remove the instrument panel (I/P) center trim bezel and the screws that retain the hazard and turn signal flasher switch to the I/P center stack. Then you remove the switch and disconnect the electrical connector from the hazard.
By Bob
GM Specialist
01/11/2022Q: How to install the hazard and turn signal flasher?
A:
You can connect the electrical connector to the hazard, turn the signal flasher switch and install the I/P center trim bezel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws of the hazard and turn signal flasher?
A:
The recommended torque is 2.5 N.m (22 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hazard and turn signal flasher?
A:
The procedure is to align the switch with the trim bezel, connect the electrical connector to the hazard, turn signal flasher switch and install the I/P center trim bezel.
By Bob
GM Specialist
01/11/2022