Part Description: 2006 Chevrolet Equinox Rear Spring
More Info
Vehicle Fitment
2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Coil Springs Repair
Q: What is the recommended torque for the bolt, the bracket, and the lower control arm?
A:
The recommended torque is 110 Nm (81 ft. lbs).
By Bob
GM Specialist
01/11/2022
Q: How to install the coil spring insulators?
A:
You can install the rubber insulators and the coil spring.
By Bob
GM Specialist
01/11/2022
Q: How to remove the coil spring?
A:
You can remove the tire and wheel, the stabilizer link, the trailing arm bracket, the lower shock bolt, the lower control arm, and the coil spring.
By Bob
GM Specialist
01/11/2022
Q: How to install the spring jounce bumper?
A:
You can install the jounce bumper and the coil spring.
By Bob
GM Specialist
01/11/2022
Q: How to remove the strut, strut component, and/or spring?
A:
After installing the strut assembly in the J 45400, you remove the upper mount assembly, the strut dust shield, and the hollow bumper from the strut shaft.
By Bob
GM Specialist
01/11/2022
Q: How to install the coil spring?
A:
You can install the hollow bumper and dust boot and lighten the shaft while verifying that the upper spring seat flats align with the top mount.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the spring jounce bumper?
A:
The procedure is to remove the jounce bumper nut, the coil spring, and the jounce bumper.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the knuckle?
A:
The recommended torque is 160 Nm (118 ft. lbs).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the strut shaft?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the coil spring?
A:
The procedure is to adjust the lower and upper legs of the J 45400 and remove the strut shaft nut, the upper mount assembly, the strut dust shield, and the hollow bumper.
By Bob
GM Specialist
01/11/2022
See more FAQs (11)
FAQ for Other Repair Info
Q: How to install the intermediate steering shaft?
A:
You need to install the intermediate Steering Shaft assembly, and a new lower intermediate shaft pinch bolt and connect the intermediate steering shaft to the steering column.
Q: How to install the wheel cylinder?
A:
You can install the Wheel Cylinder, the wheel cylinder bolts, the brake drum and the tire and wheel.
Q: How to remove the vacuum brake booster?
A:
You can remove and position aside the underhood electrical center, remove the battery tray, the master cylinder mounting nuts, the brake modulator assembly, the brake modulator valve bracket, the Brake Booster push rod-to-brake pedal retaining clip, the foam washer and the brake booster mounting nuts.