< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2006 Chevrolet Equinox
PartNumber: 130.62130Product Specifications- UPC: 805890194545
- Part Description: 2006 Chevrolet Equinox Premium Brake Master Cylinder
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$74.32
OEM (Genuine) 2006 Chevrolet Equinox Cylinder Asm, Brake Master
PartNumber: 15892508
Product Specifications- Notes: Equinox, Torrent
- Other Names: Master Cylinder
- Item Dimensions: 13.4 x 7.6 x 4.4 inches
- Item Weight: 3.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22707377
- Part Description: 2006 Chevrolet Equinox Cylinder Asm, Brake Master
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2006 Chevrolet Equinox
PartNumber: 10-3102Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- Bore Diameter (N-1): 1.515
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder
- Port Quantity: 2
- Primary Port Size: M10 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617686006
- Part Description: 2006 Chevrolet Equinox Remanufactured Master Cylinder
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the installation procedure for the master cylinder fluid level sensor?
A:
The procedure is to install the brake fluid level sensor and connect the brake fluid level sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the master cylinder fluid level sensor?
A:
The procedure is to disconnect the brake fluid level sensor electrical connector and remove the low brake fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What is used when adding fluid to the brake master cylinder reservoir?
A:
You can use only GM-approved or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: How to inspect the brake fluid level?
A:
You should visually inspect the brake fluid level through the brake master cylinder auxiliary reservoir.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder reservoir?
A:
You need to remove the brake fluid and disconnect the brake fluid lever sensor electrical connector. And then you remove the brake fluid level sensor, and the master cylinder reservoir attachment pins and discard the pins, the reservoir from the master cylinder, and the reservoir seals from the master cylinder body.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder?
A:
You will need to disconnect the electrical connector from the brake fluid level sensor and disconnect the brake pipes from the master cylinder. Then you remove the master cylinder mounting nuts and the master cylinder from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the master cylinder mounting nuts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended depth for the primary piston?
A:
The recommended depth is 25 mm (1 inch).
By Bob
GM Specialist
01/11/2022Q: What should be used when adding fluid to the brake master cylinder reservoir?
A:
You should use only GM-approved or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the master cylinder?
A:
The procedure is to install the master cylinder to the brake booster and install the master cylinder mounting nuts.
By Bob
GM Specialist
01/11/2022See more FAQs (6)