< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Front Impact Sensor
PartNumber: 10373058
Product Specifications- Notes: 1st Design
- Other Names: Front Impact Sensor
- Item Dimensions: 2.3 x 2.0 x 1.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22716083
- Part Description: 2006 Chevrolet Equinox Front Impact Sensor
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
$66.59 MSRP:$100.47You Save: $33.88 (34%)
Dorman® OE Solutions Air Bag Impact Sensor for 2006 Chevrolet Equinox
PartNumber: 590-221Product Specifications- Notes: Stamped 15860055
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 15860055
- Package Quantity: 1
- UPC: 019495423775
- Part Description: 2006 Chevrolet Equinox OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$130.06
OEM (Genuine) 2006 Chevrolet Equinox Sensor Asm-Inflator Restraint Side Imp
PartNumber: 10373059
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.9 x 4.4 x 2.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5481912, 05481912
- Part Description: 2006 Chevrolet Equinox Sensor Asm-Inflator Restraint Side Imp
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
$130.49 MSRP:$187.54You Save: $57.05 (31%)
Dorman® OE Solutions Air Bag Impact Sensor for 2006 Chevrolet Equinox
PartNumber: 590-208Product Specifications- Notes: Stamped 10373058
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 10373058
- Package Quantity: 1
- UPC: 019495423645
- Part Description: 2006 Chevrolet Equinox OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$125.69OEM (Genuine) 2006 Chevrolet Equinox Front Sensor
PartNumber: 15860055
Product Specifications- Notes: 2nd Design
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.2 x 2.1 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Equinox Front Sensor
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the recommended torque for the fasteners?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint roof rail module?
A:
You can disable the supplemental inflatable restraint (SIR) system, remove the headliner and the garnish moldings and unsnap the SIR tether retainer, the tether, the SIR module fasteners, and the SIR module.
By Bob
GM Specialist
01/11/2022Q: How to install the inflatable restraint roof rail module?
A:
You can position the module tether rearward of the molding attaching clips, and install the remaining side SIR module fasteners, the hook, the headliner, and the garnish moldings.
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint side impact sensor?
A:
You can disable the supplemental inflatable restraint (SIR) system, remove the center pillar lower molding, loosen the fasteners on the side impact sensor (SIS), remove the SIS by sliding the module up and then disconnect the SIS electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should be done to avoid personal injury?
A:
You should not strike or jolt the inflatable restraint front-end sensor. Before applying power to the frontend sensor make sure that it is securely fastened.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the TORX head bolt?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the inflatable restraint side impact sensor?
A:
You can connect the SIS electrical connector, slide the module down, and then install the center pillar lower molding.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the inflatable restraint front-end sensor?
A:
You should disable the supplemental inflatable restraint (SIR) system, which includes the Supplemental Inflatable Restraint Front End Discriminating Sensor Bolt and the Supplemental Inflatable Restraint Front End Discriminating Sensor Assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fastener?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the inflatable restraint sensing and diagnostic module?
A:
The procedure is to disable the SIR system and then remove the console assembly, the retainers from the connector position assurance (CPA), the nuts, and the sensing and diagnostic module (SDM).
By Bob
GM Specialist
28/10/2022See more FAQs (20)