Part Description: 2006 Chevrolet Corvette Valve Lifters
More Info
Vehicle Fitment
2006 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Notes: Box of 128;Hydraulic Roller Lifters;Bulk Pack
Note: O.E. Replacement
Package Alert: Carton of 128
UPC: 724956696369
Part Description: 2006 Chevrolet Corvette Engine Valve Lifter
More Info
Vehicle Fitment
2006 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
FAQ for Valve Lifter Repair
Q: What kind of special tools will be required when serving the Valve Lifter?
A:
J3049-A Valve Lifter Remover.
By Bob
GM Specialist
02/11/2022
Q: How to remove the Valve Lifter?
A:
You need to remove the cylinder head, the guide bolts, the guides with lifters, and the valve lifters from the guide, and then organize or mark the components so they can be installed in the same location from which they were removed.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: How to remove the Valve Rocker Arm and Push Rod?
A:
You need to remove the valve rocker arm covers, remove the valve rocker arm bolts, the valve rocker arms, the valve rocker arm pivot support, and the Pushrods, and clean and inspect the valve rocker arms and pushrods.
Q: Can you reuse the Valve Rocker Arm Cover Bolt Grommets?
A:
Yes, the Valve Rocker Arm Cover Bolt Grommets may be reused.
Q: How to install the valve stem keys?
A:
You need to use grease to hold the keys in place and remove J 38606, make sure the keys seat properly in the groove of the valve stem. And release the valve spring pressure, making sure the valve keys stay in place. Then remove the J 38606, and tap the end to the valve stem with a plastic-faced hammer to seat the keys.