< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Corvette
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Dorman® Engine Heater Hose Assembly for 2006 Chevrolet Corvette
PartNumber: 626-592Product Specifications- Notes: Air Bleeder Pipe
- Height: 4.16 in
- Inside Diameter: 0.21 in
- Length: 8. in
- OE Part Number: 12602548
- Outside Diameter: 0.29 in
- Package Contents: 1 Heater Hose Assembly
- UPC: 885484879430
- Width: 0.8 in
- Part Description: 2006 Chevrolet Corvette Engine Heater Hose Assembly
Vehicle Fitment- 2006 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
- 2006 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
$37.35
Gates® Safety Stripe Hvac Heater Hose for 2006 Chevrolet Corvette
PartNumber: 28409Product Specifications- Notes: Cut to Length, 17"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2006 Chevrolet Corvette Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2006 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
- 2006 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
$44.06
Gates® Safety Stripe Hvac Heater Hose for 2006 Chevrolet Corvette
PartNumber: 28407Product Specifications- Notes: Cut to Length, 8"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.25"
- OE Part Number: 34580
- UPC: 072053133219
- Weight Per Length: 6 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 2006 Chevrolet Corvette Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2006 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
- 2006 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
$31.48
Gates® Hvac Heater Molded Hose for 2006 Chevrolet Corvette
PartNumber: 18127Product Specifications- Centerline Length (in): 19.7"
- Inside Diameter 1 (in): 0.24"
- Inside Diameter 2 (in): 0.35"
- Number of Branches: 0
- UPC: 072053541298
- Part Description: 2006 Chevrolet Corvette Hvac Heater Molded Hose
Vehicle Fitment- 2006 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
- 2006 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
$13.97
FAQ for Heater Hose Repair
Q: What kind of special tools will be required in the replacement of the Heater Pipes?
A:
J38185 Spring Hose Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the heater pipe assembly retaining bolt?
A:
The recommended torque is 14 Nm (10 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Heater Inlet Hose?
A:
You need to drain the cooling system, disengage tension on the heater inlet hose clamp at the heater pipe assembly, disconnect the heater inlet hose from the heater pipe assembly, disconnect the heater inlet hose from the underhood junction box retainer clip, disengage tension on the heater inlet hose clamp at the water pump, disconnect the heater inlet hose from the water pump, and remove the heater inlet hose.
By Bob
GM Specialist
01/11/2022Q: What should you do before installing the Inlet Heater Hose?
A:
You should lubricate the inside diameters of the hose with clean coolant before installation.
By Bob
GM Specialist
01/11/2022