Part Description: 2006 Chevrolet Corvette Mount Asm-Engine
More Info
Vehicle Fitment
2006 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Part Description: 2006 Chevrolet Corvette Bracket-Engine Mount
More Info
Vehicle Fitment
2006 Chevrolet Corvette | 427 Limited Edition Z06, Base, Grand Sport, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Engine Mount Repair
Q: How to install the Engine Mount Bracket - Left?
A:
You need to install the engine mount bracket, the engine mount bracket bolts, and the left engine mount.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the engine mount bracket bolts?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: How to install the Engine Mount- Left?
A:
You need to install the engine mount heat shield to the engine mount, install the engine mount, install the engine mount-to-engine mount bracket nut, and install the front suspension crossmember.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the engine mount-to-engine mount bracket nut?
A:
The recommended torque is 65 Nm (48 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Engine Oil and Oil Filter?
A:
You need to open the hood, remove the oil fill cap and both oil pan drain plugs, drain the engine oil into an appropriate container, and remove the engine Oil Filter from the engine block.
Q: How to install the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1?
A:
You need to coat the threads of the heated Oxygen Sensor with the anti-seize compound P/N 5613695, or the equivalent, install the heated oxygen sensor, reconnect the bank 1 oxygen sensor and electrical connector to the engine wiring harness electrical connector.
Q: How to remove the Valve Rocker Arm and Push Rod?
A:
You need to remove the valve rocker arm covers, remove the valve rocker arm bolts, the valve rocker arms, the valve rocker arm pivot support, and the Pushrods, and clean and inspect the valve rocker arms and pushrods.