Part Description: 2006 Chevrolet Corvette Differential Cover
Vehicle Fitment
2006 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
FAQ for Differential Cover Repair
Q: What is the recommended torque for the differential cover (left) bolts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be required in the replacement of the Differential Carrier Cover and Seal - Right?
A:
DT-47596 Bearing Cup Remover, J 42170 Bearing and Race Installer, J 45124 Removal Bridge, and J 46405 Output Shaft Seal Installer.
By Bob
GM Specialist
01/11/2022
Q: Can you reuse the O-ring in the installation?
A:
No, you should install a new O-ring to the differential cover.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the differential to transmission nut?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to drain the Lubricant Change?
A:
You need to raise and support the vehicle, clean any dirt from around the Differential drain plug, remove the drain plug and washer from the differential, and drain the fluid.
Q: What kind of special tools will be required when serving the Wheel Drive Shaft Outer Joint and Seal?
A:
J42572 Drive Axle Seal Clamp Pliers, J 46588 Axle Seal Crimp Tool.
Q: Can you reuse the O-ring?
A:
No, you should install a new O-ring to the differential cover.