FAQ for Brake Disc Repair
Q: What should be done after the brake caliper has been removed?
A:
You need to relocate the brake caliper to the side and support it with mechanics wire or equivalent and do not let the brake caliper hang by the brake hose.
By BobGM Specialist
01/11/2022 Q: Is it okay to leave the caliper/pads installed while cutting rotors using an on-car lathe?
A:
On-car lathes should never be used with the pads and calipers installed on the vehicle. The debris from cutting the rotors can contaminate the brake pads/calipers which can lead to other brake concerns and comebacks.
By BobGM Specialist
01/11/2022 Q: Which lathe is essential for performing brake work, the bench or the on-car?
A:
Dealers must have a well-maintained bench lathe and well maintained on-car lathe. These lathes need to be calibrated monthly. BOTH lathes are essential to providing quality brake service.
By BobGM Specialist
01/11/2022 Q: Why is it necessary to burnish the brake pads and brake rotors?
A:
Burnishing the brake pads and brake rotors is necessary to ensure that the braking surfaces are properly prepared after service has been performed on the disc brake system.
By BobGM Specialist
01/11/2022