< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Corvette
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Corvette Front Sensor
PartNumber: 10362555
Product Specifications- Notes: Base, 427 & Gs
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.5 x 3.1 x 3.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302875
- Part Description: 2006 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2006 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$219.89 MSRP:$331.73You Save: $111.84 (34%)
OEM (Genuine) 2006 Chevrolet Corvette Side Sensor
PartNumber: 10362535
Product Specifications- Notes: Base, 427 & Gs
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 3.1 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302876
- Part Description: 2006 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2006 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$207.90 MSRP:$313.65You Save: $105.75 (34%)OEM (Genuine) 2006 Chevrolet Corvette Side Sensor
PartNumber: 10362536Product Specifications- Notes: Z06 & Zr1
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$36.02 MSRP:$54.36You Save: $18.34 (34%)OEM (Genuine) 2006 Chevrolet Corvette Front Sensor
PartNumber: 15781091Product Specifications- Notes: Z06 & Zr1
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$22.86 MSRP:$34.51You Save: $11.65 (34%)
FAQ for Air Bag Sensor Repair
Q: How to install the Inflatable Restraint Side Impact Module- Front?
A:
You need to install the module wiring harness to the seat frame, install the wiring harness retaining clips to the seat frame, install the side impact module to the seat frame, install the side impact module retainer to the seat back cushion cover, install the retaining bolts to the side impact module, install the seat back cover and the front seat, then enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Side Impact Module Wiring Harness?
A:
You need to disable the SIR system, remove the side impact inflator module, remove the retaining clips that secure the inflator module wiring harness to the seat, and remove the wiring harness.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Inflatable Restraint Side Impact Module Wiring Harness?
A:
The procedure is to install the new inflator module wiring harness to the seat, install the retaining clips that secure the wiring harness to the seat, and install the side impact inflator module to the seat, then enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the retaining bolts to the side impact module?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Front End Sensor?
A:
You need to disable the SIR system, remove the retaining bolts from the inflatable restraint front-end sensor, and remove the sensor.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Inflatable Restraint Front End Sensor?
A:
The procedure is to install the sensor, install the retaining bolts to the inflatable restraint front-end sensor, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: How to disable the SIR Disabling and Enabling Zone 7?
A:
You need to remove the kick-up panel, the I/P fuse block cover, and the SDM fuse, and remove both connector position assurance (CPA) from the LF/driver side impact module and pretensioner yellow connector, disconnect the vehicle harness yellow connector.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the SDM mounting fasteners?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
28/10/2022Q: How to enable the SIR Disabling and Enabling Zone 1?
A:
You need to place the ignition in the OFF position, connect both the right and left front-end sensor connector to the right and left front-end sensor, and connect both the right and left CPA to the right and left front-end sensor connector, then install the air cleaner assembly, install the SDM fuse into the I/P fuse block, install the I/P fuse block cover, and install the kick-up panel to cover the I/P fuse block. Use caution while reaching in and placing the ignition in the ON position.
By Bob
GM Specialist
28/10/2022Q: What should be done before disabling the SIR Disabling and Enabling Zone 6?
A:
You need to turn the steering wheel so that the vehicle's wheels are pointing straight ahead, and place the ignition in the OFF position,.
By Bob
GM Specialist
28/10/2022See more FAQs (11)