Part Description: 2006 Chevrolet Colorado Wiper Blade
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Wiper Blade
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Wiper, Windshield
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Wiper, Windshield
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Wiper Blade Connection Type: Nine by Three and Nine by Four Hooks
Part Description: 2006 Chevrolet Colorado 22" Black Beam Style Wiper Blade
More Info
Vehicle Fitment
2006 Chevrolet Colorado | All Trims | All Engines
FAQ for Wiper Blade Repair
Q: What is the proper way to install the wiper blade element?
A:
The proper way is to insert the open end of the wiper blade element into the bottom claws of the wiper blade, guide the wiper blade element through the wiper blade claw sets, engage the bottom claw of the wiper blade into the notches in the wiper blade element, and then install the wiper blade onto the wiper arm.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the wiper arm blade?
A:
The procedure is to lift the wiper arm and hold it in the upright position, push upward the locking tab of the wiper blade clip and pull downward on the wiper arm blade, remove the wiper blade from the inside radius of the wiper arm, and then bring the wiper arm out through the opening in the wiper blade.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the wiper blade element?
A:
The procedure is to remove the wiper blade from the wiper arm, disengage the bottom claws of the wiper blade from the notches in the wiper blade element, and then pull the wiper blade element out through the wiper blade claws.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the wiper arm blade?
A:
The proper way is to position the wiper blade in the inside radius of the wiper arm hook, insert the hook of the wiper arm through the opening in the wiper blade, pull upward until the locking tab of the pivot engages the slot in the hook, and then lower the wiper arm and blade onto the windshield.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the washer pump?
A:
The procedure is to remove the washer solvent container, pry in opposite directions to release the pump from the grommet, remove the Washer Pump from the washer container, and then discard the washer pump and grommet.
Q: What is the proper way to install the washer solvent container?
A:
The proper way is to install a new washer pump grommet into the container, install the old pump into the new pump grommet, and then install the air cleaner assembly.
Q: What is the removal procedure for the windshield washer hose?
A:
The procedure is to remove the washer hose from the nozzles, remove the hose from the air inlet panel, and then remove the washer hose from the vehicle.