Part Description: 2006 Chevrolet Colorado Window Switch
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Window Switch
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Window Switch
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Window Switch
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$184.93MSRP: $290.78
You Save: $105.85 (37%)
FAQ for Window Switch Repair
Q: What is the proper way to install the mirror, window, and door lock switch?
A:
The proper way is to install the switches to the switch plate, and then install the switch plate assembly to the door trim panel with the 2 screws.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the mirror, window, and door lock switch?
A:
The procedure is to remove the 2 screws securing the switch plate assembly to the door trim panel, remove the switch plate out of the door trim panel opening, and then remove the switch plate assembly from the vehicle.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the rear door window regulator?
A:
The proper way is to install the rear door Window Regulator into the rear door through the access hole, install the bolts retaining the rear door window regulator to the inner panel, install the bolts retaining the window to the window regulator, install the rear door water deflector, install the rear door speaker, install the rear door inside handle, and then install the rear door trim panel.
Q: What is the removal procedure for the window regulator handle?
A:
The procedure is to raise the window to the full up position, remove the window regulator handle from the door by inserting tool J 9886-01 between the handle and the white plastic washer, remove the window regulator handle from the door, and then remove the bearing plate from the door.
Q: What is the proper way to install the rear door window regulator motor?
A:
The proper way is to install the rear window regulator motor to the regulator, install the bolts retaining the rear window regulator motor to the regulator bracket, and then install the rear door window regulator.