< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Colorado Gear Assembly
PartNumber: 15951338
Product Specifications- Notes: W/O 4WD, Z85
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 29.6 x 7.4 x 6.9 inches
- Item Weight: 7.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25817575, 15864178, 15921544
- Part Description: 2006 Chevrolet Colorado Gear Assembly
Vehicle Fitment- 2006 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$451.30 MSRP:$746.95You Save: $295.65 (40%)OEM (Genuine) 2006 Chevrolet Colorado Gear Assembly
PartNumber: 25817574
Product Specifications- Notes: W/4WD;W/O 4WD, Z71
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 64.6 x 11.2 x 11.2 inches
- Item Weight: 30.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15921545
- Part Description: 2006 Chevrolet Colorado Gear Assembly
Vehicle Fitment- 2006 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$493.76 MSRP:$931.64You Save: $437.88 (48%)OEM (Genuine) 2006 Chevrolet Colorado Gear Kit, Steering (Remanufacture)
PartNumber: 19330466Product Specifications- Notes: Canyon, Colorado; 2WD; Chassis Pkg.
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 50.7 x 6.4 x 11.0 inches
- Item Weight: 20.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26095460, 19300497
- Part Description: 2006 Chevrolet Colorado Gear Kit, Steering (Remanufacture)
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
OEM (Genuine) 2006 Chevrolet Colorado Gear Kit, Steering (Rack & Pinion)
PartNumber: 26095462Product Specifications- Notes: Canyon, Colorado; 2WD; Off Road Pkg.;Canyon, Colorado; 4WD
- Other Names: Gear Assembly
- Item Dimensions: 56.2 x 6.0 x 12.0 inches
- Item Weight: 24.70 Pounds
- Replaced by: 19330469
- Part Description: 2006 Chevrolet Colorado Gear Kit, Steering (Rack & Pinion)
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
OEM (Genuine) 2006 Chevrolet Colorado Gear Kit, Steering (Remanufacture)
PartNumber: 19330468
Product Specifications- Notes: Canyon, Colorado; 2WD; Sport Chassis Pkg.
- Other Names: Steering Gear
- Item Dimensions: 51.7 x 6.4 x 10.5 inches
- Item Weight: 22.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19300498, 26095461
- Part Description: 2006 Chevrolet Colorado Gear Kit, Steering (Remanufacture)
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
OEM (Genuine) 2006 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
PartNumber: 15864177Product Specifications- Notes: W/O 4WD, Zq8
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 66.4 x 9.9 x 5.8 inches
- Item Weight: 20.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25817576, 25912267, 15921543, 15270454
- Part Description: 2006 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
Vehicle Fitment- 2006 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Steering Gearbox Repair
Q: What is the disassembly procedure for the rack and pinion boot and breather tube?
A:
The procedure is to remove the hexagon jam nut from the inner tie rod assembly, remove the tie rod end clamp from the rack and pinion boot, remove the boot clamp from the rack and pinion boot with side cutters, and then remove the rack and pinion boot and the breather tube from the rack and pinion gear assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power steering gear?
A:
The procedure is to remove both of the front tire and wheel assemblies, remove the engine protection shield, remove the coupler clamp bolt from the intermediate shaft, remove the steering gear vertical mounting nuts, remove the steering gear horizontal mounting nuts, the washers, and the bolts, remove the steering gear RH isolator bracket, and then remove the steering gear from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for the rack and pinion gear rack bearing preload adjustment?
A:
The procedure is to loosen the adjuster plug lock nut, turn the adjuster plug clockwise until the adjuster plug bottoms in the gear assembly, turn the adjuster plug back 50 degrees to 70 degrees (approximately one flat), and then install the adjuster plug lock nut to the adjuster plug.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the power steering gear?
A:
The proper way is to install the steering gear into the vehicle, install the steering gear RH isolator bracket, install the intermediate shaft to the steering gear, install the coupler clamp bolt to the intermediate shaft, install the outer tie rod end to the steering knuckle, and then install both of the front tire and wheel assemblies.
By Bob
GM Specialist
01/11/2022Q: What is the assembly procedure for the rack and pinion boot and breather tube?
A:
The proper way is to install the new boot clamp onto the rack and pinion boot, install the rack and pinion boot onto the inner tie rod assembly, install the boot clamp on the rack and pinion boot, and then install the hexagon jam nut to the inner tie rod assembly.
By Bob
GM Specialist
01/11/2022Q: What is the assembly procedure for the steering gear cylinder pipe assemblies/O-ring seals?
A:
The proper way is to replace the parts as needed, install the new LOCTITE seals to the valve end of the cylinder lines, and then install the cylinder line assemblies to the gear assembly.
By Bob
GM Specialist
01/11/2022Q: What is the disassembly procedure for the steering gear cylinder pipe assemblies/O-ring seals?
A:
The procedure is to loosen both cylinder line fittings on the cylinder end of the gear assembly, loosen both fittings on the cylinder line assemblies at the valve end of the gear assembly, remove both cylinder line assemblies from the rack and pinion gear assembly, remove the LOCTITE seals from the valve end of the line, and then discard the LOCTITE seals.
By Bob
GM Specialist
01/11/2022See more FAQs (2)