Part Description: 2006 Chevrolet Colorado Mirror Assembly
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Mirror Assembly
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Mirror Assembly
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Mirror Glass
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Mirror Asm-Outside Rear View *Black
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Mirror Glass
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Side View Mirrors Repair
Q: What is the removal procedure for the power mirror motor?
A:
The procedure is to remove the mirror glass, remove the screws retaining the mirror motor to the mirror housing, and then remove the mirror motor from the mirror housing.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the power mirror motor?
A:
The proper way is to position the mirror motor to the mirror housing, install the mirror motor to the mirror housing, install the screws retaining the mirror motor to the mirror housing, and then install the screws retaining the mirror motor to the mirror housing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the spare tire carrier?
A:
The procedure is to remove the Spare Tire Hoist guide mounting bolt from the cross-member, remove the spare tire hoist shaft guide, remove the bolt, and then remove the hoist from the vehicle.
Q: What is the adjustment procedure for the hood Latch?
A:
The procedure is to loosen the bolts retaining the Hood Latch to the radiator support and the support bracket, move the hood latch from side to side until the striker enters the center of the latch assembly, and then tighten the bolts to 10 N.m (89 lb in).
Q: What is the removal procedure for the washer pump?
A:
The procedure is to remove the washer solvent container, pry in opposite directions to release the pump from the grommet, remove the Washer Pump from the washer container, and then discard the washer pump and grommet.