2006 Chevrolet Colorado Power Steering Hose

The procedure is to remove the park brake cable adjusting nut, remove the front park brake cable from the equalizer, remove the left rear park brake cable from the equalizer, remove the retaining bolt from the left rear park brake cable, remove the park brake cable from the left frame rail, remove the park brake cable retaining nut at the left rear leaf spring, remove the left rear park brake cable retaining bracket, remove the rear brake shoes, remove the park brake cable from the backing plate, and then remove the Parking Brake Cable from the backing plate.

The procedure is to remove the tire and wheel, remove the wheel drive shaft nut, remove the brake caliper bracket, remove the upper control arm retaining nuts from the ball joint studs, remove the lower control arm retaining nut, remove the Steering Knuckle assembly from the vehicle and set on a bench, remove the ball joint using the J 6627-A, and then remove the wheel hub and bearing assembly.

The procedure is to remove the tilt spring, remove the ignition switch and lock housing, remove the upper intermediate Steering Shaft, remove the lower shaft bearing assembly, remove the pivot pins using J 21854-01, remove the steering column housing assembly, and then remove the steering shaft assembly.