Part Description: 2006 Chevrolet Colorado Automatic Transmission Pan Gasket
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Transmission Pan
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Oil Pan Repair
Q: What is the removal procedure for the oil pan?
A:
The procedure is to remove the oil level indicator and tube, remove the engine protection shield, remove the applicable components to gain clearance to remove the oil pan, remove the service slot plug, remove the nuts securing the fuel hose/pipe bracket to the transmission, and position aside, remove 4 lower transmission mounting bolts that are attached to the oil pan, remove the oil pan bolts, remove the oil pan, remove the 2 bolts from the jack screw holes, and then clean and inspect the engine block sealing surface.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the engine oil and oil filter?
A:
The proper way is to lubricate the Oil Filter seal with clean engine oil, install the new oil filter, install the oil pan drain plug, install the oil fill cap, and then inspect the oil filter and oil pan drain plug areas for leaks.
Q: What is the removal procedure for the oil filter adapter?
A:
The procedure is to remove the oil filter, remove the engine oil pressure switch if necessary, remove the Oil Filter Adapter bolts, and then remove the oil filter adapter from the engine block.
Q: What is the proper way to install the oil level indicator and tube?
A:
The proper way is to install the oil level indicator tube into the engine oil pan, install the oil level indicator tube bolt, install the oil level indicator into the tube, and then insert the fuel hoses into the retainers at the oil level indicator bracket and intake manifold.