< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Ignition, Distributors & ECM
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Colorado Cylinder & Keys
PartNumber: 89022365
Product Specifications- Notes: W/O Tilt; W/Tilt
- Other Names: Cylinder & Keys, Ignition Lock Cylinder
- Item Dimensions: 5.8 x 4.6 x 1.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Colorado Cylinder & Keys
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$29.91 MSRP:$49.53You Save: $19.62 (40%)
FAQ for Ignition Lock Cylinder Repair
Q: What should be done after the code has been determined from the code list or the key code diagram?
A:
You should cut a blank key to the proper level of each of the tumbler positions, and then inspect the key operation in the lock cylinder.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the ignition lock cylinder?
A:
The procedure is to remove the steering column trim covers, turn the ignition lock cylinder to the accessory (ACC) position, insert the 90-degree tip of a pick-type tool into the access hole of the ignition lock cylinder, push down and hold the retaining pin of the ignition lock cylinder, and then remove the ignition lock cylinder by pulling the cylinder away from the steering column.
By Bob
GM Specialist
01/11/2022Q: What should be noticed about the lock cylinder replacement?
A:
New lock cylinders (except ignition lock cylinders) are available from the service parts warehouse with new lock cylinder locking bars. The tumblers are also available and must be assembled into the cylinder as recommended.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the ignition lock cylinder?
A:
The proper way is to install the ignition lock cylinder, and then install the steering column trim covers.
By Bob
GM Specialist
01/11/2022