FAQ for Door Seal Repair
Q: What is the proper way to install the rear side access door weatherstrip?
A:
The proper way is to position the weatherstrip to the rear side access door, install the upper molded detail to the front of the rear side access door using the integral retaining pins, install the lower molded detail to the front of the rear side access door using the integral retaining pins, and then install the weatherstrip around the rear door frame using the integral retainers.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear Door Opening weatherstrip?
A:
The procedure is to remove the lower center pillar trim panel, remove the rear door opening weatherstrip from the door opening pinch-weld flange, and then remove the rear door opening weatherstrip from the vehicle.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front door weatherstrip?
A:
The procedure is to open the front door, remove the weatherstrip from around the door by inserting J 38778, or equivalent, and then remove the weatherstrip from the front door.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the auxiliary weatherstrip?
A:
The proper way is to install the auxiliary weatherstrip to the roof pinch-weld flange, and then close the front and rear doors.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the weatherstrip?
A:
The procedure is to remove the lower center pillar panel, remove the front door opening weatherstrip from the door opening pinch-weld flange, and then remove the front door opening weatherstrip from the vehicle.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear side access door weatherstrip?
A:
The procedure is to remove the upper molded detail from the front of the side access door, remove the lower molded detail from the front of the side access door, remove the weatherstrip from around the door, and then remove the weatherstrip from the side access door.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the rear door weatherstrip?
A:
The proper way is to position the weatherstrip to the rear door, and then install the weatherstrip around the rear door frame using the integral retainers.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the weatherstrip?
A:
The proper way is to position the front door opening weatherstrip to the pinch-weld flange, install the lower center pillar panel, and then pull the cord on the front door opening weatherstrip ensuring the weatherstrip lip overlaps the interior trim panels and headliner.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear door weatherstrip?
A:
The procedure is to remove the weatherstrip from around the door by inserting J 38778, or equivalent, under the weatherstrip and releasing the integral retainers from the door frame, and then removing the weatherstrip from the rear door.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the front door weatherstrip?
A:
The proper way is to position the weatherstrip to the front door, install the weatherstrip around the front door frame using the integral retainers, and then close the front door.
By BobGM Specialist
01/11/2022 See more FAQs (9)