Part Description: 2006 Chevrolet Colorado Lower Control Arm Mount Bushing
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: W/O Z71-Off Road Pkg; Canyon, Colorado; W/O Off Road
Location: Driver Side; Passenger Side
Other Names: Bushing, Upper Control Arm Bushing
Item Dimensions: 2.3 x 2.2 x 2.0 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2006 Chevrolet Colorado Bushings
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Other Names: Bushing, Lower Control Arm Front Bushing
Item Dimensions: 3.1 x 2.0 x 2.0 inches
Item Weight: 0.80 Pounds
Fitment Type: Direct Replacement
Part Description: 2006 Chevrolet Colorado Bushing-Front Lower Control Arm
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Bushing Asm-Front Upper Control Arm
More Info
Vehicle Fitment
2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Colorado Premium™ Front Lower Rearward Control Arm Bushing
Vehicle Fitment
2006 Chevrolet Colorado | All Trims | All Engines
FAQ for Control Arm Bushing Repair
Q: What is the removal procedure for the lower control arm?
A:
The procedure is to remove the front drive axle, remove the lower control arm, and then remove the rear bushing.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the lower control arm?
A:
The proper way is to install the rear bushing, install the rear bushing to the predetermined measurement taken earlier, install the lower control arm, and then install the front drive axle.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the stabilizer shaft insulator?
A:
The procedure is to raise and support the vehicle, remove the insulator clamp bolts, remove the clamps, remove the insulators, and then inspect all of the parts for wear and damage.
Q: What is the removal procedure for the shackle bushing?
A:
The procedure is to remove the spring shackle, remove the spare tire when servicing the left side bushing, and then remove the spring shackle bushing using J21474-01.