< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Colorado Stoplamp Switch
PartNumber: 20913529
Product Specifications- Notes: Canyon, Colorado
- Other Names: Stoplamp Switch
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25796381, 15186470, 15912229
- Part Description: 2006 Chevrolet Colorado Stoplamp Switch
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$14.12 MSRP:$23.35You Save: $9.23 (40%)
FAQ for Brake Light Switches Repair
Q: What is the procedure to install and adjust the stop lamp switch?
A:
The procedure is to rotate the switch counterclockwise, pull the brake pedal rearward to a full stop, push the switch inward fully until the switch body contacts the brake pedal arm striker plate, rotate the switch clockwise until a °click° is heard, and then adjust the switch.
By Bob
GM Specialist
29/10/2022Q: What should be noticed about the service?
A:
Dealers are to confirm vehicle eligibility before beginning repairs by using the Investigate Vehicle History link. Not all vehicles within the above breakpoints may be involved.
By Bob
GM Specialist
29/10/2022Q: What will be done to remedy the brake lamp switch defect?
A:
Dealers will replace the brake lamp switch assembly. The manufacturer has not yet provided an owner notification schedule. Owners may contact Chevrolet at 1-800-630-2438. GMC at 1-866-996-9463 or Isuzu at 1-800-255-6727.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the stop lamp switch?
A:
The proper way is to position the switch near the bracket, install and adjust the switch, connect the stop lamp switch electrical connectors, and then check the switch for proper operation.
By Bob
GM Specialist
29/10/2022Q: What should be done before performing this repair?
A:
You should check to see if the vehicle is involved in Safety Recall 06030. If the vehicle is involved in Safety Recall 06030 and the repair has not been performed, perform the repair using Safety Recall 06030 (labor code V1508). If the vehicle is not involved in the safety recall or has already had the safety recall performed, proceed with repairs using this Special Coverage bulletin.
By Bob
GM Specialist
29/10/2022Q: What will we do?
A:
When parts are available after August 26, 2010, your GM dealer will install a new brake lamp switch assembly. This service will be performed for you at no charge.
By Bob
GM Specialist
29/10/2022Q: What should be done for the service procedure?
A:
You should remove the stop lamp switch from the vehicle, and then install a new stop lamp switch.
By Bob
GM Specialist
29/10/2022Q: What should be done remedy to the brake lamp switch defect?
A:
Dealers will inspect and replace the necessary components as specified in the recall bulletin free of charge. GM anticipates that parts will be available by February 2010. Special coverage for vehicles registered in all other states will be implemented in the same time frame.
By Bob
GM Specialist
29/10/2022Q: What will be done to correct the brake lamps' inoperative or continuous illumination?
A:
Dealers are to install a new brake lamp switch assembly.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the stop lamp switch?
A:
The procedure is to disconnect the stop lamp switch electrical connectors, rotate the switch counterclockwise, remove the switch from the bracket, and then remove the switch from the vehicle.
By Bob
GM Specialist
29/10/2022See more FAQs (7)