2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Trunk Lid Latch Repair
Q: How many bolts does Rear Compartment Lid Latch have?
A:
It has a total of 2 rear compartment latch bolts.
By Bob
GM Specialist
01/11/2022
Q: How to install the Lock Striker-Rear Compartment Lid?
A:
You need to mark around the striker with a grease pen to retain the position of the lock striker, remove the lock striker bolts, and remove the lock striker from the rear compartment.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Lock Striker-Rear Compartment Lid?
A:
The procedure is to position the lock striker to the alignment marks, install and hand tighten the striker and bolts, close the compartment lid and inspect the striker alignment, and tighten the lock striker bolts.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How many hinge upper bolts does Hinge-Rear Door have?
A:
It has a total of 2 rear side Door Hinge upper bolts.
Q: How to remove the door jamb switch-front properly?
A:
You need to use a small flat-bladed tool to assist in removing the front Door Jamb Switch.
Q: What is the removal procedure for the Hood Latch?
A:
The procedure is to raise the hood, mark the Hood Latch location to the support bracket with a grease pencil, remove the hood latch bolts, disconnect the release cable from the hood latch by squeezing the cable retainer, and remove the hood latch.