< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Cobalt
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Cobalt Gear Assembly
PartNumber: 25956924
Product Specifications- Notes: Fe1 Suspension; Cobalt; W/Soft Ride Suspension
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 8.3 x 64.1 x 6.4 inches
- Item Weight: 15.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10373032, 15220342, 15802532, 15816429
- Part Description: 2006 Chevrolet Cobalt Gear Assembly
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$404.28 MSRP:$669.16You Save: $264.88 (40%)
OEM (Genuine) 2006 Chevrolet Cobalt Gear Kit-Steering
PartNumber: 25956925
Product Specifications- Notes: Fe3, Fe5 Suspension; Cobalt; W/O Soft Ride Suspension
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 8.1 x 62.2 x 6.2 inches
- Item Weight: 15.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15816430, 15802533
- Part Description: 2006 Chevrolet Cobalt Gear Kit-Steering
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Steering Gearbox Repair
Q: What kind of special tools will be required in the replacement of the Power Steering Gear?
A:
J24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Rack and Pinion Boot-On Vehicle?
A:
J22610 Keystone Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the new outer tie rod nuts?
A:
The recommended torque is 60 Nm (44 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Rack and Pinion Boot-On Vehicle?
A:
The procedure is to install a new clamp on the inner portion of the steering gear boot, apply grease from the service kit to the indicated locations, install the boot over the inner tie rod onto the steering gear, crimp the inner boot clamp on the steering gear housing, install the small spring clamp on the outer portion of the inner tie rod end, install a new outer to inner tie rod jam nut, the outer tie rod end, the wheel, and set the toe.
By Bob
GM Specialist
01/11/2022