< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Cobalt
OEM (Genuine) 2006 Chevrolet Cobalt Rear Cable
PartNumber: 25836299
Product Specifications- Notes: Cobalt; W/O Rear Disc Brakes
- Other Names: Cable, Rear Cable
- Item Dimensions: 4.2 x 11.7 x 11.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22703227, 15875459
- Part Description: 2006 Chevrolet Cobalt Rear Cable
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2006 Chevrolet Cobalt Rear Cable
PartNumber: 15875458
Product Specifications- Notes: Cobalt; W/Rear Disc Brakes
- Other Names: Cable, Rear Cable
- Item Dimensions: 4.0 x 11.2 x 11.7 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15854512
- Part Description: 2006 Chevrolet Cobalt Rear Cable
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Parking Brake Cable Repair
Q: How to install the Park Brake Cable- Front?
A:
You need to install the front park brake cable to the park brake lever, install the rear cable ends to the cable equalizer, use only hand tools to install the washer and NEW adjusting nut to the front park brake cable, adjust the park brake cable tension, and install the front floor console storage compartment.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the rear park brake cable guide retaining bolt?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Park Brake Cable- Front?
A:
The procedure is to remove the front floor console storage compartment, use only hand tools to remove the park brake cable adjusting nut and washer, release the rear park brake cable ends from the cable equalizer on the front cable, and remove the front park brake cable from the park brake lever by pulling the cable rearward.
By Bob
GM Specialist
02/11/2022Q: How to release the park brake lever boot properly?
A:
You can release it from the floor console and pull the boot back.
By Bob
GM Specialist
02/11/2022Q: What should be noted before serving the Park Brake Adjustment (Disc)?
A:
The park brake cable adjusting nut is a nylon lock type. You should use only hand tools whenever tightening or loosening the adjusting nut.
By Bob
GM Specialist
02/11/2022Q: How to deal with it properly when the red brake warning lamp is illuminated?
A:
You should verify if the park brake lever is in the fully released position and against the stop, and ensure that there is no slack in the park brake cables.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the park brake cable adjusting nut?
A:
The recommended torque is 3.9 Nm (35-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What should be noticed when releasing the C-shaped retainer?
A:
Do not pull on the park brake cable to release the C-shaped retainer on the cable from the bracket at the rear axle trailing arm pivot.
By Bob
GM Specialist
02/11/2022See more FAQs (3)