Part Description: 2006 Chevrolet Cobalt Cam Asm-Mode Control
More Info
Vehicle Fitment
2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Hvac Heater Blend Door Actuator Repair
Q: How to remove the Recirculation Actuator?
A:
You need to remove the fuse labeled HVAC CTRL (BATT), remove the instrument panel (I/P) retainer, disconnect the recirculation actuator electrical connector, and remove the recirculation actuator screw and the recirculation actuator.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the recirculation actuator screw?
A:
The recommended torque is 2.2 Nm (19 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the air temperature actuator?
A:
You need to remove the fuse labeled HVAC CTRL (BATT), and the steering column filler panel, disconnect the air temperature actuator electrical connector and remove the air temperature actuator screws, and the air temperature actuator.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the air temperature actuator screws?
A:
The recommended torque is 2.2 Nm (19 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the blower motor?
A:
You need to install the Blower Motor into the motor cup that was cut out of the lower case, install the blower motor nuts, attach the service ring to the motor cup with the screws included in the kit, install the blower motor and service ring into the HVAC module using the screws included in the kit, install the lower blower motor cover, then install the lower blower motor cover retaining screws, and connect the blower motor electrical connector.
Q: How to remove the blower motor resistor?
A:
You need to disconnect the Blower Motor Resistor electrical connector, unsnap the blower motor resistor from the HVAC module and remove it.
Q: How to remove the Heater Assembly?
A:
You need to remove the HVAC module, the Heater Core cover heat stakes, the heater core cover, the heater core, and the lower HVAC case heat stakes, unsnap and open the passenger compartment filter door, and remove the lower HVAC case.