< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Cobalt
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Cobalt Outer Boot
PartNumber: 10359415
Product Specifications- Notes: Auto Trans; Cobalt; W/O Ss Model
- Location: Driver Side; Passenger Side
- Other Names: Boot, Outer Boot
- Item Dimensions: 7.6 x 7.0 x 6.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Outer Boot
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$47.28 MSRP:$78.25You Save: $30.97 (40%)
Dorman® OE Solutions Inner Cv Joint Boot Kit for 2006 Chevrolet Cobalt
PartNumber: 614-002Product Specifications- Notes: Uni-Fit; Joint Dia 3.3"
- Boot Color: Grey
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.3"
- Material: Silicone
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.87"
- Split Or Solid Type: Solid
- UPC: 019495615323
- Vented Boot: No
- Part Description: 2006 Chevrolet Cobalt OE Solutions Inner Cv Joint Boot Kit
Vehicle Fitment- 2006 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
$26.21
OEM (Genuine) 2006 Chevrolet Cobalt Boot Kit, Front Wheel Drive Shaft Tri-Pot Joint
PartNumber: 10359414
Product Specifications- Notes: Cobalt; W/O Model
- Location: Driver Side; Passenger Side
- Other Names: Inner Boot
- Item Dimensions: 7.6 x 7.1 x 6.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Boot Kit, Front Wheel Drive Shaft Tri-Pot Joint
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$30.44 MSRP:$61.40You Save: $30.96 (51%)
Dorman® OE Solutions Front Outer Cv Joint Boot Kit for 2006 Chevrolet Cobalt
PartNumber: 614-001Product Specifications- Notes: Uni-Fit; Joint Dia 3.85"
- Grease Type: Non-synthetic
- Joint End Inside Diameter (In): 3.58"
- Material: Neoprene
- Number of Clamps: 2
- Shaft End Inside Diameter (In): 0.93"
- UPC: 019495615170
- Part Description: 2006 Chevrolet Cobalt OE Solutions Front Outer Cv Joint Boot Kit
Vehicle Fitment- 2006 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
$19.97
OEM (Genuine) 2006 Chevrolet Cobalt Strut Dust Shield
PartNumber: 21992520
Product Specifications- Notes: Cobalt
- Location: Driver Side; Passenger Side
- Other Names: Boot, Dust Shield, Shield, Strut Dust Shield
- Item Dimensions: 8.2 x 5.1 x 5.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Strut Dust Shield
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$12.61 MSRP:$15.22You Save: $2.61 (18%)
OEM (Genuine) 2006 Chevrolet Cobalt Boot Kit-Front Wheel Drive Shaft Cv Joint
PartNumber: 15779364
Product Specifications- Notes: Manual Trans
- Location: Driver Side; Passenger Side
- Other Names: Outer Boot
- Item Dimensions: 6.8 x 3.1 x 2.7 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Boot Kit-Front Wheel Drive Shaft Cv Joint
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Cv Joint Boot Repair
Q: Can you reuse the retaining ring?
A:
No, never reuse the retaining ring.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seal retaining clamp?
A:
The recommended torque is 176 Nm (130 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to disassemble the Wheel Drive Shaft Inner Joint and Seal (Delphi)?
A:
You need to use a hand grinder to cut through the swage ring, remove the large boot retaining clamp, dispose of the large boot retaining clamp, separate the wheel driveshaft inboard boot from the trilobal tripot bushing, slide the boot away from the joint along the shaft, remove the housing, remove and discard the trilobal tripot bushing, remove and discard the lower spacer ring, slide tripot joint spider assembly off of the shaft, remove and discard the second spacer ring, clean the tripot balls, the needle rollers, the housing, remove all traces of old grease and any contaminates.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Wheel Drive Shaft Inner Joint and Seal (GKN)?
A:
J8059 Snap Ring Pliers (Parallel Jaw), J 35910 Drive Axle Seal Clamp Pliers, J 41048 Drive Axle Swage Ring Clamp.
By Bob
GM Specialist
01/11/2022Q: Where should you clean thoroughly with cleaning solvent?
A:
You need to clean the inner and outer race assemblies, the CV joint cage, and the chrome alloy balls.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Wheel Drive Shaft Inner Joint and Seal (Delphi)?
A:
J8059 Snap Ring Pliers, J 35910 Drive Axle Seal Clamp Pliers, DT 47732 Drive Axle Swage Ring Clamp.
By Bob
GM Specialist
01/11/2022Q: What should be noted about the CV joint seal?
A:
The CV joint seal must not be dimpled, stretched, or out of shape in any way. If the seal is not shaped correctly, equalize pressure in the seal and shape the seal properly by hand.
By Bob
GM Specialist
01/11/2022See more FAQs (2)