Part Description: 2006 Chevrolet Cobalt Body Control Module Assembly
More Info
Vehicle Fitment
2006 Chevrolet Cobalt | LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Body Control Module Repair
Q: What is the recommended torque for the body control module assembly screws?
A:
The recommended torque is 2 Nm (18 Ib in).
By Bob
GM Specialist
01/11/2022
Q: What should be done before using the symptom tables?
A:
You need to perform the Diagnostic System Check-Vehicle before using the symptom tables to verify that all of the following are true: there are no DTCs set. the control modules can communicate via the serial data links. And, you need to review the system operation to familiarize yourself with the system functions.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque for the backup lamp switch?
A:
The recommended torque is 33 Nm (24 ft. lbs.).
Q: What is the recommended torque for the instrument panel cluster trim plate?
A:
The recommended torque is 10 Nm (89 Ib in).
Q: How to remove the stop lamp switch?
A:
You need to remove the accelerator pedal retaining nuts, remove the stop lamp switch by grasping the switch and turning it counterclockwise while pulling toward the front of the vehicle, then disconnect the stop lamp switch electrical connector.