< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Cobalt
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Cobalt Negative Cable
PartNumber: 88987148
Product Specifications- Notes: Short
- Other Names: Negative Cable
- Item Dimensions: 12.7 x 3.1 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88987129
- Part Description: 2006 Chevrolet Cobalt Negative Cable
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$170.58 MSRP:$321.86You Save: $151.28 (48%)
Deka® Positive Battery Cable for 2006 Chevrolet Cobalt
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2006 Chevrolet Cobalt Positive Battery Cable
Vehicle Fitment- 2006 Chevrolet Cobalt | All Trims | 4 Cyl 2.0L
- 2006 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
- 2006 Chevrolet Cobalt | All Trims | 4 Cyl 2.4L
OEM (Genuine) 2006 Chevrolet Cobalt Cable Asm, Battery Positive (196.65In. Long)
PartNumber: 88987140
Product Specifications- Notes: Long
- Other Names: Positive Cable
- Item Dimensions: 4.1 x 12.1 x 10.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Cable Asm, Battery Positive (196.65In. Long)
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2006 Chevrolet Cobalt Cable Asm, Starter Solenoid(38.5 "Long)
PartNumber: 88987143
Product Specifications- Notes: Short
- Other Names: Positive Cable
- Item Dimensions: 6.2 x 2.1 x 12.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Cable Asm, Starter Solenoid(38.5 "Long)
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2006 Chevrolet Cobalt Cable Asm, Battery Negative(22.24 " Long)
PartNumber: 88987144Product Specifications- Notes: Long
- Other Names: Negative Cable
- Item Dimensions: 6.1 x 2.0 x 12.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Cable Asm, Battery Negative(22.24 " Long)
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Battery Cables Repair
Q: What is the recommended torque for the starter solenoid terminal nut?
A:
The recommended torque is 17 Nm (13 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable (Battery to Battery Tray)?
A:
You need to disconnect the negative battery cable, disconnect the body harness electrical connector from the battery current sensor, remove the negative battery cable ground bolt, separate the negative battery cable terminal from the battery support, and remove the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before serving the Battery Positive Cable (Underhood Junction Block to Starter)?
A:
Always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing. Always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable Disconnect/Connect?
A:
You need to remove the rear compartment trim panel, record all of the vehicle preset radio stations, ensure that all lamps and accessories are OFF, and ensure that the ignition switch is in the OFF position, loosen the negative battery cable bolt, and remove the negative battery cable from the battery.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Battery Negative Cable Disconnect/Connect?
A:
The procedure is to position the negative battery cable to the battery, tighten the negative battery cable bolt, install the rear compartment trim panel, and reset the radio stations and the clock.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine harness ground nut?
A:
The recommended torque is 17 Nm (13 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the positive battery cable bolt?
A:
The recommended torque is 17 Nm (13 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What should be noticed before serving the Battery Negative Cable (Battery to Battery Tray)?
A:
Always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing. Always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: What should be noted before serving the Battery Positive Cable (Battery to Underhood Junction Block)?
A:
Always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing. Always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the battery cable ground nut?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (5)