Part Description: 2006 Chevrolet Cobalt Core Asm, A/C Refrigerant Service Valve
More Info
Vehicle Fitment
2006 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for A/C System Valve Core Repair
Q: What is the removal procedure for the service port valve core?
A:
The procedure is to recover the refrigerant and remove the service port valve core using J 46246 or equivalent.
By Bob
GM Specialist
28/10/2022
Q: How to install the service port valve core?
A:
You need to install the service port valve core using J 46246 or equivalent, evacuate and charge the refrigerant system, and leak-test the fittings using the J 39400-A.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How to install the blower motor?
A:
You need to install the Blower Motor into the motor cup that was cut out of the lower case, install the blower motor nuts, attach the service ring to the motor cup with the screws included in the kit, install the blower motor and service ring into the HVAC module using the screws included in the kit, install the lower blower motor cover, then install the lower blower motor cover retaining screws, and connect the blower motor electrical connector.
Q: How to remove the blower motor resistor?
A:
You need to disconnect the Blower Motor Resistor electrical connector, unsnap the blower motor resistor from the HVAC module and remove it.
Q: How to remove the Heater Assembly?
A:
You need to remove the HVAC module, the Heater Core cover heat stakes, the heater core cover, the heater core, and the lower HVAC case heat stakes, unsnap and open the passenger compartment filter door, and remove the lower HVAC case.