Part Description: 2005 Chevrolet Colorado Power Steering Pump
More Info
Vehicle Fitment
2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Notes: without Aftermarket Filtration Improvement;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/Reservoir
Aftermarket Filtration: Without
Attribute: With Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Thread Size: M16 x 1.5
Part Description: 2005 Chevrolet Colorado Remanufactured Power Steering Pump w/Reservoir
Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: 2005 Chevrolet Colorado Remanufactured Power Steering Pump w/o Reservoir
Part Description: 2005 Chevrolet Colorado Remanufactured Power Steering Pump
More Info
Vehicle Fitment
2005 Chevrolet Colorado | All Trims | All Engines
FAQ for Power Steering Pump Repair
Q: How do you remove the power steering pump?
A:
You should remove the air cleaner assembly, the drive belt, and the power steering pump pulley, install a drain pan under the vehicle and remove the power steering pump mounting bolts and the power steering pump.
By Bob
GM Specialist
01/11/2022
Q: How do you install the power steering pump bracket?
A:
You should install the power steering pump bracket, the power steering pump bracket mounting bolts, the drive belt tensioner, and the power steering pump.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the power steering pump mounting bolts?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: How do you install the power steering pump?
A:
You should install the power steering pump, and the power steering pump mounting bolts. remove the drain pan from under the vehicle, and install the power steering pump pulley, the drive belt, and the air cleaner assembly.
By Bob
GM Specialist
01/11/2022
Q: How do you install the power steering pulley?
A:
You should install the power steering pump pulley to the end of the power steering pump shaft, the power steering pump pulley to the power steering pump using J25033-C, and the power steering pump pulley flush against the end of the power steering pump shaft with an allowable variance of 0.25 mm (0.010 inches), and install the drive belt.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the power steering pulley?
A:
You should remove the drive belt, the power steering pump pulley using J 25034-C, and the pulley from the pump shaft.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the power steering pump bracket?
A:
You should remove the power steering pump, the drive belt tensioner, the power steering pump bracket mounting bolts, and the power steering pump bracket.
By Bob
GM Specialist
01/11/2022
See more FAQs (2)
FAQ for Other Repair Info
Q: How do you disassemble the power steering reservoir?
A:
You should remove two reservoir clips, the reservoir from the hydraulic pump housing and the LOCTITE seal from the neck of the reservoir or inside the hydraulic pump housing.