2005 Chevrolet Colorado Power Steering Hose

You should remove the adjusting nut for the parking brake, the front park brake cable from the equalizer, the right park brake cable from the equalizer, the right park brake cable from the retainer on the left frame rail, short wheelbase, the retaining bolt for the right park brake cable, the right park brake cable from the retainer on the left frame rail, long wheelbase, the retaining bolt for the park brake cable, the park brake cable from the cross member, the right park brake cable retaining bolts from the right rear frame rail, the retaining nut at the right rear spring bracket, the park brake cable from the retaining bracket, the rear brakes shoes, the park brake cable, and the Parking Brake Cable from the backing plate.

You should remove the tire and wheel, the wheel drive shaft nut, the brake caliper bracket, the upper control arm retaining nuts from the ball joint studs, the lower control arm retaining nut, the Steering Knuckle assembly from the vehicle, and set on a bench, the ball joint using the J 6627-A and the wheel hub and bearing assembly.

You should remove the tilt spring, the ignition switch and lock housing, the upper intermediate Steering Shaft, the lower shaft bearing assembly, the pivot pins by J 21854-01, the steering column housing assembly, and the steering shaft assembly.