FAQ for Door Latch Assembly Repair
Q: How do you remove the front door lock?
A:
You should remove the front door trim panel, the front door water deflector, the front inside door handle, the front door window run channel, the bolt retaining the door lock assembly to the inner panel, if equipped with AU3, the screws retaining the door lock assembly to the door and the door lock assembly from the door.
By BobGM Specialist
01/11/2022 Q: How to install the Latch-Rear Side Access Door-Lower?
A:
You should install the lower latch to the rear side access door, the bolts retaining the lower latch to the rear side access door, the nut retaining the lower latch to the rear side access door, and the rear side access door trim panel.
By BobGM Specialist
01/11/2022 Q: How to remove the Latch Control Assembly-Rear Side Access Door?
A:
You should remove the rear side access door trim panel, the rear side access door latch control handle, the bolts retaining the latch control assembly from the rear side access door, and the latch control assembly from the rear side access door.
By BobGM Specialist
01/11/2022 Q: How to remove the Wedge-Rear Side Door Access-Body Side?
A:
You should apply tape to the area around the wedge to protect the paint, heat the wedge, apply the heat using a circular motion for about 30 seconds, and remove the wedge from the body using a plastic, flat-bladed tool and all adhesive from the body.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the upper latch bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: How to install the Wedge-Rear Side Access Door-Door Side?
A:
You should install the wedge to the side access door by inserting the tabs into the slots on the door and rotating the wedge up until the retaining clip is fully seated.
By BobGM Specialist
01/11/2022 Q: How to remove the Latch-Rear Side Access Door-Lower?
A:
You should remove the rear side access door trim panel, the bolts retaining the lower latch to the rear side access door, the nut retaining the lower latch to the rear side access door and the lower latch from the rear side access door.
By BobGM Specialist
01/11/2022 Q: How to install the Latch Control Assembly-Rear Side Access Door?
A:
You should install the latch control assembly to the rear side access door, the bolts retaining the latch control assembly to the rear side access door, the rear side access door latch control handle, and the rear side access door trim panel.
By BobGM Specialist
01/11/2022 Q: How to install the Latch-Rear Side Access Door-Upper?
A:
You should install the upper latch to the rear side access door, the lower bolts retaining the upper latch to the rear side access door, the upper rear side access door upper latch bolt, and the rear side access door trim panel.
By BobGM Specialist
01/11/2022 Q: How do you install the front door lock?
A:
You should install the door lock assembly to the door, the screws retaining the door lock assembly to the door, the bolt retaining the door lock assembly to the inner panel if equipped with AU3, the lock cables into the lock cable retainer, and connect the retainer, the front door window run channel, the front inside door handle, the front door water deflector and the front door trim panel.
By BobGM Specialist
01/11/2022 See more FAQs (8)