Part Description: 2005 Chevrolet Colorado Axle Seal
More Info
Vehicle Fitment
2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2005 Chevrolet Colorado Yoke Seal
More Info
Vehicle Fitment
2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2005 Chevrolet Colorado Pinion Seal
More Info
Vehicle Fitment
2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2005 Chevrolet Colorado Premium™ Axle Shaft Seal
More Info
Vehicle Fitment
2005 Chevrolet Colorado | All Trims | All Engines
$1.27
FAQ for Axle Shaft Seal Repair
Q: How do you install the rear axle shaft seal and/or bearing?
A:
You should install the axle bearing by the J 23690 and the J 8092, the axle shaft seal by the J21128, the axle shaft and the tire and wheel assembly.
By Bob
GM Specialist
28/10/2022
Q: How do you remove the axle seal and/or bearing?
A:
You should remove the wheel drive shaft, the swaybar link from the lower control arm, the axle seal by the J 29369-2 and the J 2619-01, and remove the axle bearing by the J 29369-2 and the J 2619-01.
By Bob
GM Specialist
28/10/2022
Q: How do you remove the rear axle shaft seal and/or bearing?
A:
You should remove the tire and wheel assembly, the axle shaft and the axle shaft bearing and seal by the J 44685 and the J 2619-01.
By Bob
GM Specialist
28/10/2022
Q: How do you install the axle seal and/or bearing?
A:
You should position the axle bearing in the intermediate housing, install the axle bearing by the J 23690 and the J 8092, the axle seal by the J 21426, and install the wheel drive shaft and the swaybar link to the lower control arm.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How do you install the differential carrier assembly?
A:
You should install the mounting bracket to the Differential housing, the vent hose, the electric motor actuator, the electrical connector, the front wheel drive shafts, the front propeller shaft, and the front tires and wheels.
Q: What is the recommended torque for the front wheel drive shaft nut?
A:
The recommended torque is 260 Nm (191 ft. lbs.).
Q: What is the recommended torque for the small retaining clamp?