< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Colorado
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2005 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 25980812
Product Specifications- Notes: Canyon, Colorado; W/O Off Road
- Item Dimensions: 4.4 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)
Dorman® OE Solutions Air Bag Impact Sensor for 2005 Chevrolet Colorado
PartNumber: 590-209Product Specifications- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 15779005
- Package Quantity: 1
- UPC: 019495423652
- Part Description: 2005 Chevrolet Colorado OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | All Trims | All Engines
$69.76OEM (Genuine) 2005 Chevrolet Colorado Front Sensor
PartNumber: 15779005Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15176442, 10395111, 15106280
- Replaced by: 85598010
- Part Description: 2005 Chevrolet Colorado Front Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$156.48 MSRP:$236.08You Save: $79.60 (34%)OEM (Genuine) 2005 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 20864450Product Specifications- Notes: Canyon, Colorado; W/Off Road
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2005 Chevrolet Colorado Side Sensor
PartNumber: 10368336
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15106279
- Part Description: 2005 Chevrolet Colorado Side Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$23.97 MSRP:$36.17You Save: $12.20 (34%)
FAQ for Air Bag Sensor Repair
Q: How do you install the inflatable restraint roof rail module-front (regular and extended cab)?
A:
You should install the 3 bolts retaining the roof rail airbag module to the roof, a new forward curtain clip, the bolt retaining the rear curtain to the roof, the rear tether bolt, the clips to the pillar, the roof rail airbag forward tether bolt, the headliner and the head restraints from the front seats.
By Bob
GM Specialist
01/11/2022Q: How do you remove the inflatable restraint roof rail module?
A:
You should remove the head restraints from the front seats, the forward tether bolt, the clips from the pillar, the 3 bolts retaining the rear curtain to the roof, the bolt retaining the bracket to the roof, the forward curtain clip, the 3 bolts retaining the airbag module to the roof and the roof rail airbag from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the inflatable restraint roof rail module?
A:
You should install the 3 bolts retaining the roof rail airbag module to the roof, the forward curtain clip, and the bolt retaining the bracket to the roof.
By Bob
GM Specialist
01/11/2022Q: How do you remove the inflatable restraint steering wheel module?
A:
You should Locate the access holes positioned on both sides of the steering wheel shroud, push the leaf spring fasteners inward through the access holes, Lift and partially remove the inflatable restraint steering wheel module from the steering wheel to expose the electrical connectors, disconnect the electrical connectors and the horn electrical connector, and remove the inflatable restraint module from the steering wheel.
By Bob
GM Specialist
01/11/2022Q: How do you install the inflatable restraint steering wheel module?
A:
You should position the inflatable restraint module to the steering wheel, connect the electrical connectors to the inflatable restraint steering wheel module, connect the horn electrical connector, and position the 4 alignment posts of the inflatable restraint module to the holes that are located on the steering wheel housing and push the inflatable restraint module into the steering wheel to engage and latch the leaf spring fasteners.
By Bob
GM Specialist
01/11/2022Q: How do you remove the inflatable restraint roof rail module-front (regular and extended cab)?
A:
You should remove the head restraints from the front seats, the forward tether bolt, the clips from the pillar, the forward curtain clip, the 3 bolts retaining the airbag module to the roof, the bolt retaining the rear curtain to the roof, the rear tether bolt and the roof rail airbag from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you remove the inflatable restraint front-end sensor?
A:
You should remove the grille, the sensor assembly from the radiator support, the connector-position assurance (CPA) from the sensor electrical connector, and the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Side Impact Sensor (SIS)?
A:
You should remove the front door trim panel, the screws that retain the side impact sensor to the door, and the side impact sensor from the door.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint SIS?
A:
You should remove any dirt, grease, or other impurities from the mounting surface, position the side impact sensor horizontally to the door, connect the electrical connector to the side impact sensor, and install the screws which retain the side impact sensor to the door and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How do you install the inflatable restraint front-end sensor?
A:
You should remove any dirt, grease, or other impurities from the mounting surfaces, and install the CPA to the sensor electrical connector, the sensor assembly to the radiator support, the 2 fasteners retaining the discriminating sensor assembly to the radiator support, and the grille.
By Bob
GM Specialist
01/11/2022See more FAQs (17)