< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Colorado
< Back to View All
Engine Sensors, Switches & Relays
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Colorado Pedal Travel Sensor
PartNumber: 25955673
Product Specifications- Notes: Canyon, Colorado
- Other Names: Pedal Travel Sensor
- Item Dimensions: 15.2 x 5.3 x 5.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10376526
- Part Description: 2005 Chevrolet Colorado Pedal Travel Sensor
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$129.81 MSRP:$234.98You Save: $105.17 (45%)
FAQ for Accelerator Pedal Position Sensor Repair
Q: What is the recommended torque for the APP sensor mounting nuts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the APP sensor?
A:
You should install and position the APP sensor over the studs, install the APP sensor nuts, connect the APP sensor electrical connector and inspect below the pedal for binding, to ensure the full range of motion.
By Bob
GM Specialist
01/11/2022Q: How do you remove the longitudinal accelerometer?
A:
You should remove the left split bench or bucket sea, the electrical connector from the sensor, the 2 nuts retaining the sensor to the floor panel, and the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What needs to be done before removing the electrical connector from the sensor?
A:
You will access the sensor through the service slit provided on the carpet.
By Bob
GM Specialist
01/11/2022Q: How do you remove the accelerator pedal position(APP) sensor?
A:
You should disconnect the accelerator pedal position (APP) sensor electrical connector, then remove the APP sensor nuts and the APP sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the longitudinal accelerometer?
A:
You should install the sensor from the vehicle, the 2 nuts retaining, the electrical connector from the sensor, and the left split bench or bucket sea.
By Bob
GM Specialist
01/11/2022See more FAQs (1)