FAQ for A/C Hose Repair
Q: How do you remove the condenser tube?
A:
You should recover the refrigerant, the grille, the condenser tube bolt from the receiver dehydrator, the condenser tube from the receiver dehydrator, the condenser tube nut from the evaporator tube, and the condenser tube.
By BobGM Specialist
28/10/2022 Q: How do you install the evaporator tube?
A:
You should install the new O-ring seal, the evaporator tube, the nut to the evaporator tube block fitting, the evaporator tube to the retaining clips on the cowl and fender, the evaporator tube to the TXV and the evaporator tube nut to the TXV stud.
By BobGM Specialist
28/10/2022 Q: How do you remove the suction hose?
A:
You should remove the suction hose mounting bolt from the A/C compressor, the suction hose from the A/C compressor, the nut from the thermostatic expansion valve (TXV) stud, the suction hose from the TXV and the suction hose assembly from the vehicle.
By BobGM Specialist
28/10/2022 Q: How do you remove the discharge hose?
A:
You should remove the discharge hose mounting bolt from the A/C compressor, the discharge hose from the A/C compressor, the discharge hose bolt from the condenser, the discharge hose from the condenser, and the discharge hose from the vehicle.
By BobGM Specialist
28/10/2022 Q: How do you install the suction hose?
A:
You should install the suction hose to the vehicle, new sealing washers, the suction hose to the TXV, the nut to the TXV stud, the suction hose to the compressor using new sealing washers, and the suction hose mounting bolt to the A/C compressor.
By BobGM Specialist
28/10/2022 Q: How do you remove the evaporator tube?
A:
You should remove the evaporator tube nut from the TXV stud, the evaporator tube from the TXV, the evaporator tube from the retaining clips on the cowl and fender, the nut from the evaporator tube block fitting, the evaporator tube, and the O-ring seal.
By BobGM Specialist
28/10/2022 Q: How do you install the discharge hose?
A:
You should install the discharge hose to the condenser using new sealing washers, the discharge hose bolt to the condense, the discharge hose to the A/C compressor using new sealing washers, and the discharge hose mounting bolt to the A/C compressor.
By BobGM Specialist
28/10/2022 Q: What is the recommended torque for the nut to the evaporator tube block fitting?
A:
The recommended torque is 28 N.m (21 lb-ft).
By BobGM Specialist
28/10/2022 Q: How do you install the condenser tube?
A:
You should install the condenser tube to the evaporator tube and the receiver dehydrator, install the condenser tube bolt to the receiver dehydrator, and then install the grille.
By BobGM Specialist
28/10/2022 See more FAQs (4)