FAQ for Wiper Blade Repair
Q: What is the removal procedure for the Wiper Blade Element?
A:
Remove the wiper blade from the wiper arm, remove the bottom claws of the wiper blade, and pull the wiper blade element out through the wiper blade claws.
By BobGM Specialist
01/11/2022 Q: How do you clean the Blade Element?
A:
Lift each blade assembly off of the windshield and clean the element with a cloth saturated with full-strength washer solvent. Then rinse the blade assemblies with clear water.
By BobGM Specialist
01/11/2022 Q: What should be noticed when servicing the Wiper Blade Element?
A:
Replace the wiper blade element if it is removed from the wiper blade.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the Wiper Arm Blade?
A:
Insert the hook of the wiper arm through the opening in the wiper blade. Position the wiper blade pivot in the inside radius of the wiper arm hook. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook. Operate the wipers and inspect them for proper operation.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Wiper Arm Blade?
A:
Turn the ignition switch to the ACCY position. Set the wiper switch to the INT position. Turn the ignition off when the wipers are in the mid position. Push the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm. Bring the wiper arm out through the opening in the wiper blade.
By BobGM Specialist
01/11/2022