FAQ for Window Motor Repair
Q: What should be done before servicing the Window Regulator Motor?
A:
You should remove the rear window regulator before servicing the Window Regulator Motor.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the rear window regulator motor screws?
A:
The recommended torque is 10 N.m (89 lb in).
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the Window Regulator Motor?
A:
Position the front door window regulator motor to the alignment pins on the front door locking system module. Press the front door window regulator motor onto the front door locking system module until the retaining tabs are fully seated over the front door window regulator motor ends. Connect the front door window regulator motor electrical connector. Install the front door water deflector.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Window Regulator Motor?
A:
Remove the front door water deflector. Disconnect the front door window regulator electrical connector. Press the front door window motor retaining tabs out to release the front door window regulator motor from the front door system locking module. Remove the front door window regulator from the front door system locking module.
By BobGM Specialist
01/11/2022