< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Classic
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Dorman® Shift Interlock Solenoid for 2005 Chevrolet Classic
PartNumber: 924-705Product Specifications- Color/Finish: Black
- Connector Quantity: 1
- Connector Shape: Square
- Connector Terminal Quantity: 2
- Connector Type: Spade
- Housing Material: Plastic
- Installation Hardware Included: No
- Mounting Location: Interior
- Mounting Method: Clips
- OE Part Number: 22611473, 22704629, 22704630
- Package Contents: 1 Assembly
- UPC: 019495245261
- Wiring Harness Included: No
- Part Description: Shift Interlock Solenoid
$76.81
FAQ for Shift Interlock Solenoid Repair
Q: Can the shift lever be moved out of the Park position without activating the brake?
A:
When the ignition switch is in the RUN or ON position, the shift lever cannot be moved out of the Park position without activating the brake.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the 1-2 Shift Solenoid Valve?
A:
Install the 1-2 shift valve spring, the 1-2 shift valve, the 1-2 shift solenoid with O-ring, the 1-2 shift solenoid retainer clip, and the transmission side cover.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Automatic Transmission Shift Lock Actuator?
A:
Disconnect the negative battery cable, remove the center console, disconnect the electrical connector, and remove both ends of the AT shift lock control from pivot points.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the 1-2 Shift Solenoid Valve?
A:
Remove the transmission side cover. Remove the 1-2 shift solenoid retainer clip, the 1-2 shift solenoid with O-ring, the 1-2 shift valve, and the 1-2 shift valve spring.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the 2-3 Shift Solenoid Valve?
A:
Install the 2-3 shift valve spring, the 2-3 shift valve, the 2-3 shift solenoid with O-ring, and the 2-3 shift solenoid retainer clip. Install the transmission side cover.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the 2-3 Shift Solenoid Valve?
A:
Remove the transmission side cover. Remove the 2-3 shift solenoid retainer clip, the 2-3 shift solenoid with O-ring, the 2-3 shift valve, and the 2-3 shift valve spring.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Automatic Transmission Shift Lock Actuator?
A:
Install the upper clip of the AT shift lock control onto the upper pivot point, and the lower clip onto the lower pivot point. Install the center console. Connect the electrical connector to the AT shift lock control. Connect the negative battery cable.
By Bob
GM Specialist
01/11/2022See more FAQs (2)