Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: Engine Coolant Temperature Sensor
More Info
FAQ for Coolant Temperature Sensors Repair
Q: What should be done before servicing the Engine Coolant Temperature Sensor?
A:
Turn OFF the ignition.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the ECT sensor?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to avoid being burned?
A:
To avoid being burned, do not remove the Radiator Cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam under pressure if the radiator cap or surge tank cap is removed while the engine and radiator are still hot.
Q: What should be done before servicing the Water Pump?
A:
You should remove the exhaust manifold before servicing the Water Pump.
Q: What is the removal procedure for the Thermostat?
A:
Remove the exhaust manifold, drain the cooling system, remove the Thermostat housing to the water pump feed pipe, and remove the thermostat.