< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Classic
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2005 Chevrolet Classic
PartNumber: 130.62118Product Specifications- Notes: N Body
- UPC: 805890121763
- Part Description: Premium Brake Master Cylinder
$55.42
Cardone Reman® Remanufactured Master Cylinder for 2005 Chevrolet Classic
PartNumber: 10-2959Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 0.946"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: M10 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M10 x 1.0
- UPC: 082617589079
- Part Description: Remanufactured Master Cylinder
OEM (Genuine) 2005 Chevrolet Classic Cylinder Asm, Brake Master
PartNumber: 18060787
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 12.0 x 8.0 x 6.6 inches
- Item Weight: 2.20 Pounds
- Replaces: 18045119
- Part Description: Cylinder Asm, Brake Master
FAQ for Brake Master Cylinder Repair
Q: How do you remove the reservoir from the master cylinder?
A:
Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Master Cylinder?
A:
Disconnect the electrical connector from the brake fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when adding fluid to the brake master cylinder reservoir?
A:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the master cylinder mounting nuts?
A:
The recommended torque is 27 N.m (20 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Master Cylinder Reservoir?
A:
Remove the master cylinder.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Master Cylinder Fluid Level Sensor?
A:
Disconnect the electrical connector from the brake fluid level sensor. Remove the brake fluid level sensor. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove it.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the Master Cylinder?
A:
Do not use abrasives to clean the brake master cylinder bore.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Master Cylinder Fluid Level Sensor?
A:
Place the brake fluid level sensor into the reservoir, and press it into place to secure the sensor retaining tabs. Connect the electrical connector to the brake fluid level sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (3)