< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2005 Chevrolet Cavalier Filler Cap O-Ring
PartNumber: 12572638
Product Specifications- Other Names: Filler Cap O-Ring, Valve Lifters
- Item Dimensions: 3.1 x 3.0 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12686787
- Part Description: 2005 Chevrolet Cavalier Filler Cap O-Ring
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
$14.00 MSRP:$23.17You Save: $9.17 (40%)
Sealed Power® Valve Lifter for 2005 Chevrolet Cavalier
PartNumber: HT-2307Product Specifications- UPC: 614046948730
- Part Description: 2005 Chevrolet Cavalier Valve Lifter
Vehicle Fitment- 2005 Chevrolet Cavalier | All Trims | 4 Cyl 2.2L
$9.97
FAQ for Valve Lifter Repair
Q: What is the removal procedure for the intake camshaft and lifter?
A:
The procedure is to remove the camshaft cover and the upper timing chain guide, install the J 43655, remove both the intake and exhaust camshaft sprocket bolts, slide the camshaft sprockets forward, remove the power steering pump bolts and set the pump aside, mark bearing caps, remove the bearing caps and the intake camshaft and remove the camshaft roller followers and the hydraulic element lash adjusters.
By Bob
GM Specialist
02/11/2022Q: How do you install the exhaust camshaft and lifter?
A:
You can lubricate the valve tips, install the hydraulic element lash adjusters and the camshaft roller followers, ensure that the alignment notches are aligned with the camshaft sprocket, install the exhaust camshaft and the camshaft bearing caps, tighten the camshaft bearing cap bolts, install camshaft sprockets, hand tighten new camshaft sprocket bolts, remove the J 43655, tighten the camshaft sprocket bolts, install the upper timing chain guide and install the camshaft cover.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the exhaust camshaft and lifter?
A:
The procedure is to remove the camshaft cover and the upper timing chain guide, install the J 43655, remove both the intake and the exhaust camshaft sprocket bolts, slide the camshaft sprockets forward, mark the bearing caps, remove the bearing caps, the exhaust camshaft, the camshaft roller followers and the hydraulic element lash adjusters.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the rear intake camshaft bearing cap bolts?
A:
You can tighten the bolts to 25 Nm (19 ft. lbs.).
By Bob
GM Specialist
02/11/2022