< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Cavalier Fuel Injection Air Meter BODY
PartNumber: 17202005
Product Specifications- Notes: Cavalier, Sunfire; 2.2l; Auto Trans; Dohc;Cavalier, Sunfire; 2.2l; Manual Trans; Dohc
- Other Names: Throttle Body
- Item Dimensions: 7.4 x 13.5 x 12.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Fuel Injection Air Meter BODY
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L GAS
FAQ for Throttle Body Repair
Q: What is the proper way to install the accelerator controls cable bracket?
A:
You can install the accelerator bracket, connect the accelerator control cable to the throttle body and accelerator bracket, connect the cruise control cable and install the air cleaner outlet resonator.
By Bob
GM Specialist
02/11/2022Q: How do you replace the accelerator controls cable?
A:
You can depress the accelerator control cable tangs, remove the accelerator control cable, remove the cruise control cable, release the accelerator control cable lug, depress the tangs on the control cable, remove the control cable, disconnect the control cable and remove the cable.
By Bob
GM Specialist
02/11/2022Q: How do you replace the accelerator controls cable bracket?
A:
You can remove the air cleaner outlet resonator, disconnect the cruise control cable and the accelerator control cable, remove the 2 accelerator bracket nuts and remove the accelerator bracket.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the accelerator control cable?
A:
You can route the accelerator control cable through the control cable bracket, press the cable tabs into the bracket, install the control cable lug, connect the cable to the support clip, install the cruise control cable, install the cable, slip the accelerator cable through the slot in the rod of the accelerator pedal, install the retainer in the rod, ensure the cable is completely seated in the throttle cam past the retaining clips and inspect for the correct opening and closing positions by operating the accelerator pedal.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the throttle body assembly?
A:
The procedure is to remove the air cleaner resonator, disconnect the idle air control (IAC) valve harness connector, the throttle position (TP) sensor harness connector, and the vacuum hoses at the throttle body, remove the accelerator control bracket and cables, remove the throttle body attaching bolts and studs and remove the throttle body.
By Bob
GM Specialist
02/11/2022Q: How do you install the throttle body assembly?
A:
You can inspect the throttle body gasket, install the throttle body to the intake manifold, install the throttle body attaching bolts and studs, install the accelerator cable bracket and cables, connect the vacuum hoses, the TP sensor harness connector, and the IAC valve harness connector, install the air cleaner resonator and test the accelerator movement.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the idle air control (IAC) valve?
A:
The procedure is to lubricate the IAC valve seal with clean engine oil, install the IAC valve into the throttle body, install the IAC valve screw, connect the IAC valve harness connector, install the air cleaner outlet resonator and reset the IAC valve pintle.
By Bob
GM Specialist
01/11/2022Q: How do you replace the idle air control (IAC) valve?
A:
You can remove the air cleaner outlet resonator, disconnect the IAC valve harness connector, remove the IAC valve screw and remove the IAC valve and seal.
By Bob
GM Specialist
01/11/2022See more FAQs (3)