< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
OEM (Genuine) 2005 Chevrolet Cavalier Cable Asm-Parking Brake Front
PartNumber: 22690647
Product Specifications- Notes: Cavalier, Sunfire
- Other Names: Front Cable
- Item Dimensions: 4.1 x 11.7 x 11.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22679461, 22603399, 22634721, 22636670
- Part Description: 2005 Chevrolet Cavalier Cable Asm-Parking Brake Front
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2005 Chevrolet Cavalier Cable Asm-Parking Brake Rear
PartNumber: 22698457Product Specifications- Notes: Cavalier, Sunfire
- Other Names: Rear Cable
- Item Dimensions: 29.8 x 1.9 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Cable Asm-Parking Brake Rear
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
FAQ for Parking Brake Cable Repair
Q: What tool can you use to release the cable conduit end fitting from the lever assembly?
A:
You can use the J 37043.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the front park brake cable guide retaining bolt?
A:
You can tighten the bolt to 10 Nm (89-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What should you do while holding the cable in position from front to rear?
A:
You should move the cable end to the back of the park brake lever.
By Bob
GM Specialist
02/11/2022Q: How do you replace the left rear park brake cable?
A:
You can release the tension from the park brake cable system, raise the vehicle, release the left rear cable end, release the park brake cable conduit end fitting, remove the left rear tire and wheel assembly, remove the brake drum, depress the visible retaining tab on the park brake cable fitting, rotate the park brake cable, depress the remaining retaining tab on the park brake cable fitting, move the majority of the cable return spring back, push the cable toward the rear of the vehicle, lift the cable and remove the cable.
By Bob
GM Specialist
02/11/2022Q: How do you disable the park brake cable automatic adjuster?
A:
You can remove the floor console, ensure that the park brake lever assembly is fully released, raise the vehicle, have an assistant pull, hold the front park brake cable toward the rear of the vehicle, and have the assistant pull the front cable until the notch on the ratcheting cam is visible through the opening in the cam cover plate, push the pawl spring downward and have the assistant slowly release the cable to allow the notch on the cam to catch the leg of the spring.
By Bob
GM Specialist
02/11/2022Q: How do you replace the park brake cable equalizer?
A:
You can release the tension from the park brake cable system, raise the vehicle, release the left rear cable end and release the front cable conduit end fitting.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to replace the park lock cable?
A:
You can disconnect the negative battery cable, remove the console, remove the knee bolster, loosen the lower steering column bracket bolts, lower the steering column, place the transmission shift lever in the PARK position, turn the ignition key to the RUN position, insert a screwdriver blade into the slot, depress the cable latch, push the cable connector lock button at the shifter base to the up position, unsnap the cable, depress the two cable latches, remove the control cable latches and remove the control cable clips.
By Bob
GM Specialist
02/11/2022Q: What is the first step for installing the left rear park brake cable?
A:
The first step is to insert the park brake cable through the opening in the backing plate.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the park brake cable equalizer?
A:
The procedure is to secure the front cable conduit end fitting to the cable equalizer, secure the left rear cable end to the cable equalizer, lower the vehicle and restore the tension to the park brake cable system.
By Bob
GM Specialist
02/11/2022Q: What should you do before installing the steering column to the instrument panel?
A:
You should inspect for proper operation of the park/lock control cable before installing the steering column to the instrument panel.
By Bob
GM Specialist
02/11/2022See more FAQs (7)