Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2005 Chevrolet Cavalier Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2005 Chevrolet Cavalier | All Trims | 4 Cyl 2.2L
FAQ for Coolant Temperature Sensors Repair
Q: What is the removal procedure for the engine coolant temperature (ECT) sensor?
A:
The procedure is to turn OFF the ignition, drain the coolant system, disconnect the ECT sensor electrical connector and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
Q: How do you install the engine coolant temperature (ECT) sensor?
A:
You can coat the threads with sealer P/N 9985253 or an equivalent, install the ECT sensor, connect the ECT sensor electrical connector and refill the engine coolant system.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the cooling fan relay?
A:
You can remove the underhood electrical center cover and the Cooling Fan Relay.
Q: What is the removal procedure for the inlet radiator hose (2.2L-L61)?
A:
The procedure is to drain the cooling system, reposition the inlet hose clamp from the water outlet, remove the inlet Radiator Hose, reposition the inlet hose clamp to the radiator and remove the inlet radiator hose.
Q: What is the proper way to install the thermostat (2.2L-L61)?
A:
You can install the Thermostat, install the thermostat housing to the water pump feed pipe, install the thermostat housing to the water pump feed pipe bolt, install the exhaust manifold and fill the cooling system.