< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Cavalier Module
PartNumber: 22712779
Product Specifications- Notes: Body, Body Control, W/O Keyless Entry
- Other Names: Module
- Item Dimensions: 6.2 x 4.2 x 10.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22682857
- Part Description: 2005 Chevrolet Cavalier Module
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
$118.02 MSRP:$213.05You Save: $95.03 (45%)OEM (Genuine) 2005 Chevrolet Cavalier Module
PartNumber: 22708635
Product Specifications- Notes: Body, Body Control, W/Keyless Entry
- Other Names: Module
- Item Dimensions: 6.4 x 4.1 x 10.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22682859
- Part Description: 2005 Chevrolet Cavalier Module
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
FAQ for Body Control Module Repair
Q: What is the removal procedure for the body control module?
A:
The procedure is to disconnect the negative battery cable, release the body control module (BCM) wire harness retainer, disconnect the BCM electrical connectors, release the lock tabs, remove the BCM, remove the BCM bracket nuts and remove the BCM bracket.
By Bob
GM Specialist
01/11/2022Q: What tool can you use to verify the Driver Door Ajar Switch input indicates open?
A:
You can use the scan tool.
By Bob
GM Specialist
01/11/2022Q: How do you install the body control module?
A:
You can install the BCM bracket, the BCM bracket nuts, and the BCM, connect the BCM electrical connectors, install the BCM wire harness retainer, connect the negative battery cable and reprogram the BCM.
By Bob
GM Specialist
01/11/2022Q: What is the purpose of using the scan tool data display values and definitions?
A:
The purpose is to assist in diagnosing vehicle malfunctions.
By Bob
GM Specialist
01/11/2022Q: What should you do after verifying all power modes?
A:
You should turn the ignition OFF.
By Bob
GM Specialist
01/11/2022Q: What should you perform before using the symptom tables?
A:
You should perform the Diagnostic System Check-Vehicle in Vehicle DTC Information.
By Bob
GM Specialist
01/11/2022Q: What should you do during Diagnostic Trouble Code Tests?
A:
You should open the driver's door and leave it open.
By Bob
GM Specialist
01/11/2022Q: What should you do to set up a new BCM?
A:
You should access the SPECIAL FUNCTIONS menu on the scan tool to program the BCM.
By Bob
GM Specialist
01/11/2022Q: What can be used to aid in understanding the nature of the concern when the vehicle data display does not match the typical data values?
A:
You can use the definitions information.
By Bob
GM Specialist
01/11/2022Q: What may be the cause of intermittent conditions?
A:
Faulty electrical connections or wiring may be the cause of intermittent conditions.
By Bob
GM Specialist
01/11/2022See more FAQs (7)