< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Cavalier Front Sensor
PartNumber: 16197309
Product Specifications- Notes: Front
- Other Names: Front Sensor, Impact Sensor, Sensor
- Item Dimensions: 6.4 x 3.3 x 3.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Front Sensor
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$49.68 MSRP:$78.15You Save: $28.47 (37%)
OEM (Genuine) 2005 Chevrolet Cavalier Module Asm-Inflator Restraint Side Imp Sensor
PartNumber: 22718422
Product Specifications- Notes: Side Impact Sensor, 2 Door
- Location: Driver Side
- Other Names: Module, Side Impact Sensor
- Item Dimensions: 3.9 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22707132
- Part Description: 2005 Chevrolet Cavalier Module Asm-Inflator Restraint Side Imp Sensor
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L GAS
OEM (Genuine) 2005 Chevrolet Cavalier Module Asm-Inflator Restraint Side Imp Sensor
PartNumber: 22718421Product Specifications- Notes: Side Impact Sensor, 2 Door
- Location: Passenger Side
- Other Names: Module, Side Impact Sensor
- Item Dimensions: 4.1 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22707131
- Part Description: 2005 Chevrolet Cavalier Module Asm-Inflator Restraint Side Imp Sensor
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the proper way to install the inflatable restraint steering wheel module?
A:
You can connect the horn contact lead to the steering wheel cam tower, rotate the horn contact lead 1/4 turn clockwise, connect the yellow SIR electrical connector, install the CPA, install the inflator module, install the upper trim cover, enable the SIR system and deploy the module before disposal.
By Bob
GM Specialist
01/11/2022Q: Where can you deploy the inflator module?
A:
You can deploy the inflator inside or outside of the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the front inflatable restraint side impact module?
A:
You can position the inflator module into the vehicle, connect the electrical connector, install the CPA, install the inflator module to the seat back frame, install the mounting nuts to the inflator module, install the seat back cover, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front inflatable restraint side impact module?
A:
The procedure is to disable the SIR system, inspect the seat and replace any damaged parts, remove enough of the seat back cover, remove the mounting nuts, remove the inflator module from the seat back frame, remove the connector position assurance (CPA), disconnect the electrical connector, remove the inflator module from the vehicle and deploy the module before disposal.
By Bob
GM Specialist
01/11/2022Q: What is the purpose of twisting together one end from each of the wires?
A:
The purpose is to short the wires.
By Bob
GM Specialist
01/11/2022Q: What does the proper operation of the Supplemental Inflatable Restraint (SIR) sensing system require?
A:
Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configuration.
By Bob
GM Specialist
01/11/2022Q: What should you deploy when the vehicle will be returned to service?
A:
You should deploy the inflator module outside of the vehicle when the vehicle will be returned to service.
By Bob
GM Specialist
01/11/2022Q: How do you replace the inflatable restraint steering wheel module?
A:
You can disable the SIR system, remove the upper trim cover, turn the steering wheel, adjust and install J 44298 into the 2 openings, pull the handle toward the steering wheel, pull the inflator module, remove the connector position assurance (CPA), disconnect the yellow SIR electrical connector, rotate the horn contact lead counterclockwise 1/4 turn and remove the horn contact lead from the steering column cam tower.
By Bob
GM Specialist
01/11/2022Q: What should you do when destroying the vehicle or when salvaging the vehicle for parts?
A:
You should deploy the inflator modules inside the vehicle.
By Bob
GM Specialist
01/11/2022Q: Where should you place the steering wheel module when deploying the steering wheel module?
A:
You should place the steering wheel module in the center of the space.
By Bob
GM Specialist
01/11/2022See more FAQs (24)