< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Car Bulbs
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Blazer Run Lamp Bulb
PartNumber: 15828918
Product Specifications- Notes: 1998-2005, W/O Fog Lamps
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999368, 12450182, 9442486, 09442486, 01999368, 12450053
- Part Description: 2005 Chevrolet Blazer Run Lamp Bulb
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$5.06 MSRP:$9.15You Save: $4.09 (45%)
OEM (Genuine) 2005 Chevrolet Blazer Run Lamp Bulb
PartNumber: 9425542
Product Specifications- Notes: W/O Sliding Glass Sunroof
- Item Dimensions: 4.5 x 3.1 x 2.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Run Lamp Bulb
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$3.42 MSRP:$6.18You Save: $2.76 (45%)
OEM (Genuine) 2005 Chevrolet Blazer Stoplamp Bulb
PartNumber: 12450108
Product Specifications- Notes: 1998-2005, W/Fog Lamps
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.1 x 3.0 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450004
- Part Description: 2005 Chevrolet Blazer Stoplamp Bulb
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$4.05 MSRP:$7.62You Save: $3.57 (47%)
OEM (Genuine) 2005 Chevrolet Blazer Stoplamp Bulb
PartNumber: 9441839
Product Specifications- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15883346
- Part Description: 2005 Chevrolet Blazer Stoplamp Bulb
Vehicle Fitment- 2005 Chevrolet Blazer | Base, Cheyenne, LS, LT, Silverado, Silverado Sport, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
$2.72 MSRP:$4.89You Save: $2.17 (45%)
FAQ for Turn Signal Bulbs Repair
Q: What is the installation procedure for the Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, and Turn Signal Bulb?
A:
The procedure is to push in and rotate the bulbs 1/4 turn clockwise to install the bulbs to the headlamp, connect the lamp electrical connectors, then install the headlamp assembly, and the headlamp assembly retainers.
By Bob
GM Specialist
01/11/2022Q: How to remove the Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, and Turn Signal Bulb?
A:
You need to remove the headlamp assembly retainers, disconnect the lamp electrical connectors, remove the headlamp assembly, then push and rotate the bulb 1/4 turn counterclockwise to remove the bulbs from the headlamp assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Tail Lamp Assembly and/or Backup, Sidemarker, Stop, Turn Signal Bulb (Utility)?
A:
You need to install the bulbs into the sockets, install the bulb sockets to the tail lamp assembly, then install the tail lamp assembly and the screws that retain the tail lamp assembly to the vehicle, and finally close the endgate or liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws retaining the tail lamp assembly?
A:
The recommended torque is 1.9 Nm (17 lb in).
By Bob
GM Specialist
01/11/2022